Dry Sliding Wear Behaviour of Al6061-Reinforcement with Graphite and Palm Stalk Ash

被引：0
作者：
Nithyanandhan T. [1 ]
Mohanraj N. [1 ]
Sureshkumar P. [2 ]
Sanjeev [1 ]
机构：
[1] Dept. of Mech. Engg, Sri Krishna College of Tech, Tamil Nadu, Coimbatore
[2] Dept. of Mech. Engg, JCT College of Engg. & Tech, Tamil Nadu, Coimbatore
来源：
International Journal of Vehicle Structures and Systems | 2023年 / 15卷 / 01期
关键词：
Al6061; Graphite; Palm stalk ash; Pin on disc; Wear;
D O I：
10.4273/ijvss.15.1.13
中图分类号：
学科分类号：
摘要：
In this research an attempt is made to improve and to examine the wear behaviour of AL6061 composite with two different fillers such as graphite by adding the reinforcement particles of palm stalk ashes. AL6061 composite is developed on a metal matrix composite with the weight percentage of graphite (0.7 %) which is kept constant for all specimens and the reinforcement of palm stalk ash is varied as a percentage of weight (0.7%, 1.4%, 2.1%, 2.8% and 3.5%). Reinforced composites were preheated in the electrical furnace at 150°C for about an hour to remove the moisture. The reinforcement was added into molten aluminium into the stir casting furnace. The wear behaviour and corrosion rate of fabricated AL6061 metal composite reinforced with different dissipate materials were studied. © 2023. Carbon Magics Ltd.
引用
收藏
页码：69 / 72
页数：3
相关论文
共 19 条
  • [1] Nithyanandhan T., Investigation of mechanical properties on aluminium based hybrid composites, Int. J. Innovative Research in Sci., Engg. and Tech, 7, pp. 118-126, (2017)
  • [2] Pridhar T., Evaluation on properties and characterization of asbestos free palm kernel shell fibre (PKSF)/polymer composites for brake pads, Materials Research Express, 6, pp. 11-19, (2019)
  • [3] Nithyanandhan T., Investigation of corrosion characteristics of aluminium 6063 reinforced with Al2O3-CBA by using stir casting, IOP Conf. Series, Materials Sci. and Engg, pp. 1-6, (2021)
  • [4] Nithyanandhan T., Sivaraman P., Ramamoorthi R., Sureshkumar P., Kannakumar R., Kumar A.N., Enhancement of corrosion behaviour of AL6061-B4C-RHA reinforced hybrid composite, Materials Today: Proc, 33, 1, pp. 372-377, (2020)
  • [5] Nithyanandhan T., Prabhu M.K., Sivaraman P., Koushik K., Razzaq M.M., Development of aluminium based AA 2014 and AA 7075 dissimilar metals for aerospace applications, Materials Today: Proc, 37, 2, pp. 522-526, (2021)
  • [6] Pridhar T., Mechanical properties and characterization of zirconium oxide (ZrO2) and coconut shell ash (CSA) reinforced aluminium (Al 6082) matrix hybrid composite, J. Alloys and Compounds, 765, pp. 171-179, (2018)
  • [7] Baradeswaran A., Elayaperumal A., Effect of graphical content on tribological behaviour of aluminium alloy-graphite composite, European J. Scientific Research, 2, pp. 163-170, (2011)
  • [8] Nithyanandhan T., Mechanical properties and tribological behaviour of reinforced aluminium MMCs, Int. J. Recent Tech. and Engg, 8, pp. 1191-1195, (2020)
  • [9] Ravikumar M., Reddappa H.N., Suresh R., Aluminium composites fabrication technique and effect of improvement in their mechanical properties-A review, Materials Today: Proc, 5, 11, pp. 23796-23805, (2018)
  • [10] Pitchayyapillai G., Seenikannan P., Raja K., Chandrasekaran K., Al6061 hybrid MMC reinforced with alumina and molybdenum disulphide, Adv. in Materials Sci. and Engg, pp. 1-9, (2016)
12