Analysis of Surface Characteristics of Printing Paper Using Contact Profilometry

被引：0

作者：

Lee Y.J. ^{[1
]}

Kim J.H. ^{[1
]}

Cha J.E. ^{[1
]}

Kang N.Y. ^{[1
]}

Kim H.J. ^{[1
]}

机构：

[1] Department of Forest Products & Biotechnology, College of Science and Technology, Kookmin University

来源：

Palpu Chongi Gisul/Journal of Korea Technical Association of the Pulp and Paper Industry | 2023年 / 55卷 / 02期

关键词：

copy paper; fiber length; fiber width; filler; mean absolute deviation (MAD); pigments; Printing paper; profilometry; surface friction; surface roughness;

D O I：

10.7584/JKTAPPI.2023.4.55.2.48

中图分类号：

学科分类号：

摘要：

The surface roughness and frictional properties of printing paper can significantly impact ink transfer and printability during the printing process. Therefore, the aim of this study was to investigate the surface characteristics of paper in relation to its physical and chemical properties. Surface characteristics were analyzed using profilometry, and the physical and chemical properties of the paper were evaluated based on fiber and filler properties. The results revealed a significant correlation between filler behavior and surface properties. Furthermore, the mean absolute deviation (MAD) as a parameter representing the absolute deviation from the mean value, indicated that the variability depending on the measurement conditions was relatively small in the evaluation of the surface characteristics. Therefore, it is expected that the application range will be wide in the future. © 2023 Korean Technical Assoc. of the Pulp and Paper Industry. All rights reserved.

引用

页码：48 / 58

页数：10

共 50 条

[1] DESCRIBING GROUND SURFACE TEXTURE USING CONTACT PROFILOMETRY AND FRACTAL ANALYSIS
BROWN, CA
SAVARY, G
WEAR, 1991, 141 (02) : 211 - 226
[2] Surface Characterization of Paper Products by Profilometry with a Fractal Dimension Analysis
Lee, Yong Ju
Ko, Young Chan
Moon, Byoung Geun
Jin Kim, Hyoung
BIORESOURCES, 2023, 18 (02) : 3978 - 3994
[3] Influence of paper surface characteristics on digital printing quality
Ataeefard, M.
SURFACE ENGINEERING, 2014, 30 (07) : 529 - 534
[4] Using Laser Profilometry to Investigation FDM Printing Parameters for Outer-Perimeter Analysis and Surface Quality Improvement
Kalman, Olha
Husar, Jozef
Lazorik, Peter
APPLIED SCIENCES-BASEL, 2024, 14 (20):
[5] INFLUENCE OF FIBRE CHARACTERISTICS ON THE SURFACE ROUGHNESS OF PAPER AND ON FLEXOGRAPHIC PRINTING QUALITY
De Magistris, Federica
Germgard, Ulf
Beghello, Luciano
Jarnstrom, Lars
Lestelius, Magnus
RESEARCH PROGRESS IN PAPER INDUSTRY AND BIOREFINERY (4TH ISETPP), VOLS 1-3, 2010, : 1543 - 1545
[6] Customer Service and Troubleshooting: Printing problems associated with coated paper surface characteristics
Hertogs, Bruce
Paper Technology, 2006, 47 (01): : 27 - 29
[7] Effect of Paper Surface Characteristics on Dot Gain in Ink-jet Printing
Qu Zhencai
Chen Guangxue
Tang Baoling
Wen Shuangshuang
PRINTING AND PACKAGING STUDY, 2011, 174 : 227 - 230
[8] DIAGNOSTICS OF SELECTED SURFACE CHARACTERISTICS WITH LASER PROFILOMETRY
Ruzbarsky, Juraj
Mital, Gerhard
MM SCIENCE JOURNAL, 2018, 2018 : 2140 - 2143
[9] Paper and board surface roughness characterization using laser profilometry and gray level cooccurrence matrix
Hladnik, Ales
Lazar, Mihael
NORDIC PULP & PAPER RESEARCH JOURNAL, 2011, 26 (01) : 99 - 105
[10] Surface topographic and transparent film thickness measurements of paper using laser triangulation profilometry.
Breternitz, E
Sung, YJ
Elgay, P
Luner, P
Keller, DS
TAPPI ADVANCED COATING FUNDAMENTALS SYMPOSIUM, 1999, : 169 - 169

← 1 2 3 4 5 →