Probabilistic fatigue life prediction of metallic components based on continuum damage mechanics

被引：0

作者：

Liu X. ^{[1
,2
]}

Sun Q. ^{[3
]}

机构：

[1] School of Aeronautical Engineering, Zhengzhou University of Aeronautics, Zhengzhou

[2] Research Institute of Unmanned Aerial Vehicles, Zhengzhou University of Aeronautics, Zhengzhou

[3] School of Aeronautics, Northwestern Polytechnical University, Xi'an

来源：

Xibei Gongye Daxue Xuebao/Journal of Northwestern Polytechnical University | 2021年 / 39卷 / 02期

关键词：

Aluminum alloy; Continuum damage mechanics; Fatigue test; FEM analysis; High-cycle fatigue; Lemaitre model; Life prediction; Probabilistic property;

D O I：

10.1051/jnwpu/20213920326

中图分类号：

学科分类号：

摘要：

Based on continuum damage mechanics, a probabilistic method of predicting high-cycle fatigue life for metallic components is proposed. First, macro-meso two-scale stress-strain equations are established by combining Eshelby-Kroner localization law and classic elastic-plastic constitutive equation. Second, some parameters in Lemaitre's fatigue damage evolution model are randomized. Probabilistic properties of which are obtained by inverse-analysis and optimization. Then, the probabilistic method of predicting high-cycle fatigue life is established by coupling the model with macro-meso two-scale equations. And the proposed algorithm is coded with Fortran language, which is non-intrusive post-program of FEM analysis. Next, constant amplitude fatigue test of Al 2024-T3 coupon is performed to determine probabilistic properties of model parameters. Finally, as the object of study, wallboard is analyzed by FEM. Taking skin-strip component as research object, the fatigue life of hot spot is predicted by proposed method. The corresponding fatigue test of the component is performed, which verifies the effectiveness of proposed method to predict probabilistic life of metallic components. © 2021 Journal of Northwestern Polytechnical University.

引用

页码：326 / 333

页数：7

共 13 条

[1]

Fatigue reliability, ASCE Journal of the Structural Division, 108, 1, pp. 3-88, (1982)

[2]

BAI Enjun, HUANG Shutao, XIE Liyang, P-S-N curves fitting of small sample with fatigue lives obeying Weibull distribution, Journal of Xi'an Jiaotong University, 53, 9, pp. 96-101, (2019)

[3]

LIU Hongbin, CHEN Wei, LIU Lin, Prediction method and verification of fatigue life for a turbine disk with bolt hole, Journal of Northwestern Polytechnical University, 37, 4, pp. 744-750, (2019)

[4]

LUO Yuan, YAN Donghuang, YUAN Ming, Fatigue reliability assessment of simply supported bridges subject to impact of stochastic vehicle loads, Chinese Journal of Computational Mechanics, 35, 4, pp. 417-423, (2018)

[5]

MA Yu'e, WANG Bo, XIONG Xiaofeng, Experimental study of fatigue damage of glass-fiber reinforced aluminum laminates(FMLs), Journal of Northwestern Polytechnical University, 34, 2, pp. 41-45, (2016)

[6]

DOUDARD C, CALLOCH S, CUGY P, Et al., A probabilistic two-scale model for high-cycle fatigue life predictions, Fatigue & Fracture of Engineering Materials & Structures, 28, 3, pp. 279-288, (2005)

[7]

SANTECCHIA E, HAMOUDA A M S, MUSHARAVATI F, Et al., A review on fatigue life prediction methods for metals, Advances in Materials Science and Engineering, 2016, pp. 1-26, (2016)

[8]

TODINOV M T., Necessary and sufficient condition for additivity in the sense of Palmgren-Miner rule, Comput Mater Sci, 21, pp. 101-110, (2001)

[9]

KRAJCINOVIC D, LEMAITRE J., Continuum damage mechanics:theory and applications, (1987)

[10]

LEMAITRE J, SERMAGE J P, DESMORAT R., A two scale damage concept applied to fatigue, International Journal of Fracture, 97, pp. 67-81, (1999)

← 1 2 →