A hybrid calculation method of three-phase power flow with distributed generation resource on a distribution network

被引：0

作者：

Deng H. ^{[1
]}

Zhang L. ^{[1
]}

Tang C. ^{[1
]}

Liu Z. ^{[1
]}

机构：

[1] School of Electric Power, South China University of Technology, Guangzhou

来源：

Dianli Xitong Baohu yu Kongzhi/Power System Protection and Control | 2020年 / 48卷 / 14期

基金：

中国国家自然科学基金;

关键词：

Distributed power supply; Distribution network; Forward-backward algorithm; Loop impedance matrix method; Three-phase power flow calculation;

D O I：

10.19783/j.cnki.pspc.191027

中图分类号：

学科分类号：

摘要：

Given the shortcomings of the three-phase power flow calculation method for the distribution network, a new three-phase power flow hybrid calculation method for a distribution network with distributed power supply is proposed. This paper first analyzes the characteristics of the relevant components, and establishes the three-phase mathematical model of distribution lines, distribution transformers and loads. Analyzing the processing methods of four different types of distributed power supply nodes, a three-phase power flow calculation model is established using a forward-backward algorithm and the Newton-Laphson method. The loop impedance matrix method is used to calculate the three-phase voltage difference. It solves the applicability problem of the single-phase power flow calculation. The convergence of the node voltage is used to control the power flow calculation. The voltage value can be obtained directly, and the iterative calculation is simple and efficient. Finally, it is verified that this method has good convergence by taking the IEEE 33-node network model and a 10 kV distribution line from Shantan substation as examples. © 2020, Power System Protection and Control Press. All right reserved.

引用

页码：10 / 17

页数：7

共 29 条

[1]

KUMAR D, SAMANTARAY S R, JOOS G., A reliability assessment based graph theoretical approach for feeder routing in power distribution networks including distributed generations, International Journal of Electrical Power & Energy Systems, 57, pp. 11-30, (2014)

[2]

WANG Shouxiang, HUANG Lijuan, WANG Chengshan, Et al., Unbalanced three-phase power flow calculation of distributed power generation system, Electric Power Automation Equipment, 27, 8, pp. 11-15, (2007)

[3]

YUDE Y, ANJUN S, HUI L, Et al., Parallel computing of multi-contingency optimal power flow with transient stability constraints, Protection and Control of Modern Power Systems, 3, 2, pp. 204-213, (2018)

[4]

KERSTING W H., Distribution system modeling and analysis, (2002)

[5]

JU Yuntao, WU Wenchuan, ZHANG Boming, Et al., Three-phase steady-state model of distributed power supply, Proceedings of the CSEE, 34, 10, pp. 1509-1518, (2014)

[6]

ALAM M J E, MUTTAQI K M, SUTANTO D., A three-phase power flow approach for integrated 3-wire MV and 4-wire multigrounded LV networks with rooftop solar PV, IEEE Transactions on Power Systems, 28, 2, pp. 1728-1737, (2013)

[7]

LI Hongwei, SUN Hongbin, ZHANG An'an, Positive-sequence component based three-phase unbalanced power flow solution for distribution system with PV nodes, Proceedings of the CSEE, 32, 1, pp. 115-121, (2012)

[8]

CHEN Haiyan, CHEN Jinfu, DUAN Xianzhong, Power flow calculation of distribution network with distributed power supply, Automation of Electric Power systems, 30, 1, pp. 35-40, (2016)

[9]

GOSWAMI S K, BASU S K., Direct solution of distribution systems, IEE Proceedings C-Generation, Transmission and Distribution, 138, 1, pp. 78-88, (1991)

[10]

LIU Kuan, WANG Chun, WU Huicheng, Et al., A linear power flow calculation method for distribution networks with PV nodes, Power System Protection and Control, 47, 3, pp. 17-22, (2019)

← 1 2 3 →