Design and Experiment of Zigzag Opener for Double-row No-tillage Seeding on Soybean Ridge

被引：0

作者：

Zhao S. ^{[1
]}

Yang L. ^{[1
]}

Zhang X. ^{[1
]}

Hou L. ^{[1
]}

Yuan Y. ^{[1
]}

Yang Y. ^{[1
]}

机构：

[1] College of Engineering, Northeast Agricultural University, Harbin

来源：

Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery | 2022年 / 53卷 / 01期

关键词：

Discrete element; Double-row; No-tillage sowing; Opener; Sawtooth; Soybean;

D O I：

10.6041/j.issn.1000-1298.2022.01.008

中图分类号：

学科分类号：

摘要：

Under the corn-soybean rotation no-tillage planting mode, the corn root-soil combination is large and the ridge distribution is uneven, which hinders the ridge movement of the double-row sowing opener on the soybean ridge, resulting in the uniformity of the seeding depth and the consistency of the row spacing. For poor problems, a double-row sowing opener on a sawtooth soybean ridge was designed. Based on the description of the structure and working principle of the double-row sowing opener on the zigzag soybean ridge, the rake curve was designed, and the rake curve equation was deduced; the mechanical model of the side cutting root system was analyzed, and the side cutting was determined to be sawtooth. The agronomic measurement of the corn root-soil combination determined the key parameters of the sawtooth side edge; according to the agronomic requirements of soybean seeding, it was clear that the seed guide tube in the main body of the opener was arranged in a staggered manner, and the sawtooth opening was determined. The gap angle of the ditch device was 5°. The results of the discrete element simulation verification test showed that the sawtooth opener can effectively cut the corn root system and had better working stability, which verified the rationality of the design idea. Under the conditions of a forward speed of 7 km/h and a trenching depth of 50 mm, the field performance test was conducted with the root cutting rate as the main indicator. The results showed that the serrated side edge had a strong sawing ability, and the average root cutting rate was 97.25%. Field comparison experiments with double-disc openers showed that compared with double-disc openers, the coefficient of variation of trenching depth was reduced by 43.33%, and the coefficient of variation of transverse seed spacing was reduced by 60.81%. Both the simulation test and the field test showed that the sawtooth opener met the agronomic requirements of double-row sowing on no-till soybean ridges. © 2022, Chinese Society of Agricultural Machinery. All right reserved.

引用

页码：74 / 84

页数：10

共 27 条

[11]

HOU Shouyin, CHEN Haitao, ZOU Zhen, Et al., Structural parameter optimization of double-row furrow cutters on ridge of soybean in the original stubble-field, Journal of Northeast Agricultural University, 50, 2, pp. 71-78, (2019)

[12]

ZHAO Shuhong, TAN Hewen, CHEN Junzhi, Et al., Performance optimization of double disc seed furrow opener under deep fertilization, Journal of Northeast Agricultural University, 48, 11, pp. 86-96, (2017)

[13]

BOTTA G F, TOLON-BECERRA A, LASTRA-BRAVO X, Et al., Tillage and traffic effects (planters and tractors) on soil compaction and soybean (Glycine max L) yields in Argentinean pampas, Soil and Tillage Research, 110, 1, pp. 147-167, (2010)

[14]

VAMERALI T, BERTOCCOB M, SARTOTRI L., Effects of a new wide-sweep opener for no-till seeder on seed zone properties and root establishment in maize: a comparison with double-disk opener, Soil and Tillage Research, 89, pp. 196-209, (2006)

[15]

GU Yaoquan, JIA Honglei, GUO Hui, Et al., Design and test of sliding knife trench cutters, Transactions of the Chinese Society for Agricultural Machinery, 44, 2, pp. 38-42, (2013)

[16]

ZHANG Xiangcai, LI Hongwen, DU Ruicheng, Et al., Influence of key structural parameters of sliding-type furrow cutters on soil characteristics of seed beds, China Agricultural Abstract-Agricultural Engineering, 29, 3, pp. 7-15, (2017)

[17]

GOU Wen, MA Rongchao, YANG Wenyu, Et al., Design of opener on no-till wheat seeder, Transactions of the CSAE, 28, pp. 21-25, (2012)

[18]

(1997)

[19]

(2007)

[20]

QUAN Longzhe, TONG Jin, ZENG Baigong, Et al., Optimization design of sliding cutting edge curve of corn rootstalk cutting tool, Transactions of the CSAE, 27, 12, pp. 13-17, (2011)

← 1 2 3 →