Environmental Adaptability and Tribological Properties of MoS2/WS2 Composite Films

被引：0
|
作者：
Fan X. [1 ,2 ]
Ren S. [1 ]
Wang H. [1 ]
Pu J. [1 ]
机构：
[1] Key Laboratory of Marine Materials and Related Technologies, Zhejiang Key Laboratory of Marine Materials and Protective Technologies, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo
[2] University of Chinese Academy of Sciences, Beijing
来源：
Zhongguo Jixie Gongcheng/China Mechanical Engineering | 2022年 / 33卷 / 12期
关键词：
Corrosion resistance; MoS[!sub]2[!/sub]/WS[!sub]2[!/sub] composite film; Salt spray environment; Tribological property;
D O I：
10.3969/j.issn.1004-132X.2022.12.008
中图分类号：
学科分类号：
摘要：
The hot and humid atmosphere had a serious deteriorating effect on the tribological properties of the MoS2 lubricating films. Unbalanced magnetron sputtering technology was successfully used to prepare WS2 doped MoS2 composite films, and the addition of a small amount of WS2 in the MoS2 matrix might induce the preferential growth of MoS2 along the(002) crystal planes, the film structure became denser, the penetration and diffusion of corrosive media were significantly inhibited, and the MoS2/WS2 composite film exhibited high salt spray corrosion resistance, low friction coefficient and wear rate. The composition-optimized MoS2-1.6at.%WS2 composite film was only oxidized on the surface layers after 4 days of salt spray, and still maintained a low friction coefficient of 0.16 and a low wear rate of 3.80×10-6 mm3/(N•m). © 2022, China Mechanical Engineering Magazine Office. All right reserved.
引用
收藏
页码：1468 / 1476
页数：8
相关论文
共 26 条
  • [1] TAN Xinfeng, LUO Jianbin, Research Advances of Lubrication, China Mechanical Engineering, 31, 2, pp. 145-174, (2020)
  • [2] SINGER I L, FAYEULLE S, EHNI P D., Wear Behavior of Triode-sputtered MoS<sub>2</sub> Coatings in Dry Sliding Contact with Steel and Ceramics, Wear, 195, 1, pp. 7-20, (1996)
  • [3] XU Zengchuang, CUI Weixin, HE Jingjian, Et al., Vacuum Boundary Lubrication Performances of Three Solid-Liquid Composite Lubrication Systems, China Mechanical Engineering, 32, 11, pp. 1293-1298, (2021)
  • [4] DUDDER G J, ZHAO X Y, KRICK B, Et al., Environmental Effects on the Tribology and Microstructure of MoS<sub>2</sub>-Sb<sub>2</sub>O<sub>3</sub>-C Films, Tribology Letters, 42, 2, pp. 203-213, (2011)
  • [5] SMITH C T G, DELKOWKI M, ANGUITA J V, Et al., Complete Atomic Oxygen and UV Protection for Polymer and Composite Materials in a Low Earth Orbit, ACS Applied Materials & Interfaces, 13, 5, pp. 6670-6677, (2021)
  • [6] SHANG Kedong, ZHENG Shaoxian, JU Pengfei, Et al., Tribological Performance of MoS<sub>2</sub>/Pb-Ti Nano-multilayer Coating Applied in Marine Atmospheric Environment of South China Sea, Tribology, 38, 4, pp. 417-429, (2018)
  • [7] REN S M, SHANG K D, CUI M J, Et al., Structural Design of MoS<sub>2</sub>-based Coatings toward High Humidity and Wide Temperature, Journal of Materials Science, 54, 18, pp. 11889-11902, (2019)
  • [8] CHANG Keke, WANG Liping, XUE Qunji, Progresses of Damage and Protection for Surfaces and Interfaces in Machinery under Extreme Operating Conditions, China Mechanical Engineering, 31, 2, pp. 206-220, (2020)
  • [9] DING X Z, ZENG X T, HE X Y, Et al., Tribological Properties of Cr- and Ti-doped MoS<sub>2</sub> Composite Coatings under Different Humidity Atmosphere, Surface & Coatings Technology, 205, 1, pp. 224-231, (2010)
  • [10] SHANG K D, ZHENG S X, REN S M, Et al., Improving the Tribological and Corrosive Properties of MoS<sub>2</sub>-based Coatings by Dual-doping and Multilayer Construction, Applied Surface Science, 437, pp. 233-244, (2018)
123