Influence of Double Circular Arc Harmonic Transmission Profile Parameters on Flexspline Stress

被引：0
|
作者：
Jiang Q. [1 ]
Wang J. [1 ,2 ]
Li J. [1 ]
Xiao K. [1 ]
Tang T. [1 ]
Wang C. [1 ]
机构：
[1] State Key Laboratory of Mechanical Transmission, Chongqing University, Chongqing
[2] School of Aeronautics and Astronautics, Sichuan University, Chengdu
来源：
Shanghai Jiaotong Daxue Xuebao/Journal of Shanghai Jiaotong University | 2020年 / 54卷 / 02期
关键词：
Double arc tooth profile; Finite element method; Harmonic gear drive; Response surface model; Tooth profile parameter;
D O I：
10.16183/j.cnki.jsjtu.2020.02.008
中图分类号：
学科分类号：
摘要：
In view of the influence of tooth profile parameters on the fatigue life of flexspline without considering the tooth profile parameters in the design specifications, the enveloping method is used to design the double tangent conjugate tooth profile without common tangent, and the multi-body contact finite element analysis is carried out. The response surface model of tooth profile parameter and flexspline stress is established, and the influence law of each tooth profile parameter on the flexspline stress is analyzed. The results show that the flexspline stress is more sensitive to the change of tooth profile parameters due to the deforming of the flexspline caused by the meshing teeth between the circular spline and the flexspline; the harmonic drive is more tooth meshing transmission, so the single contact tooth is less loaded and the load has less effect on the stress of the flexspline. The ratio of tooth thickness has the greatest effect on the flexspline stress. The teeth height coefficient and the root fillet radius have the second impact, and the dedendum high coefficient has the least impact. The flexspline stress decreases with the increase of root radius and root height coefficient and then increases, and the other factors are inversely proportional to the stress of the flexspline. © 2020, Shanghai Jiao Tong University Press. All right reserved.
引用
收藏
页码：167 / 175
页数：8
相关论文
共 11 条
  • [1] Li Q., Zuo Y., Analysis of failure mode of flexible gear of harmonic reducer, Robot Technology and Application, 4, 2, pp. 37-38, (2013)
  • [2] Ivanov, Shen Y., Li K., Harmonic Gear Transmission, pp. 34-48, (1987)
  • [3] Shen Y., Ye Q., Theory and Design of Harmonic Gear Transmission, pp. 180-186, (1985)
  • [4] He L., Zhou Q., Du Y., Et al., Design and finite-element analysis on double-circular-arc gear of the turbodrill reducer, Advanced Materials Research, 926, pp. 1247-1252, (2014)
  • [5] Chen Y.C., Cheng Y.H., Tseng J.T., Et al., Study of a harmonic drive with involute profile flex-spline by two-dimensional finite element analysis, Engineering Computations, 34, 7, pp. 10-17, (2017)
  • [6] Dong H., Zhu Z., Zhou W., Et al., Dynamic simulation of harmonic gear drives considering tooth profiles parameters optimization, Journal of Computers, 7, 6, pp. 1429-1436, (2012)
  • [7] Routh B., Maiti R., Ray A.K., Et al., An investigation on secondary force contacts of tooth pairs in conventional harmonic drives with involute toothed gear set, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 230, 4, pp. 622-638, (2016)
  • [8] Sahoo V., Maiti R., Load sharing by tooth pairs in involute toothed harmonic drive with conventional wave generator cam, Meccanica, 53, 1, pp. 373-394, (2018)
  • [9] Sahoo V., Maiti R., Evidence of secondary tooth contact in harmonic drive, with involute toothed gear pair, through experimental and finite element analyses of stresses in flex-gear cup, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 232, 2, pp. 341-357, (2018)
  • [10] Chen X., Cheng K., Stress analysis of harmonic gear driven in assemble state with 3D solid finite element model, Journal of Tianjin Polytechnic University, 35, 5, pp. 77-82, (2016)
12