Influence of plasma pretreatment on structure and properties of polypyrrole/polyester warp knitted conductive fabric

被引：0

作者：

Lin J. ^{[1
]}

Miao X. ^{[1
]}

Wan A. ^{[1
]}

机构：

[1] School of Textiles and Clothing, Jiangnan University, Wuxi, 214122, Jiangsu

来源：

Fangzhi Xuebao/Journal of Textile Research | 2019年 / 40卷 / 09期

关键词：

Adhesion effect; Atmospheric temperature and pressure plasma; Conductive fabric; Polyester knitted fabric; Polypyrrole;

D O I：

10.13475/j.fzxb.20180702105

中图分类号：

学科分类号：

摘要：

In order to improve the adhesion effect of conductive polymer on polyester warp knitted fabric, the surface of the fabric was modified by atmospheric pressure plasma treatment, and the conductive knitted fabric was prepared by in-situ polymerization. The influence of plasma pretreatment on the adhesion of polypyrrole to polyester knitted fabrics was studied. The micro-morphology of conductive fabrics was observed by a scanning electron microscopy, and the square resistance of conductive fabrics before and after flat grinding was measured by a resistometer. The results show that plasma pretreatment can increase the adhesion of polypyrrole to polyester fibers, improve the adhesion fastness of polypyrrole to polyester fibers, and improve the retention of conductive layers of conductive fabrics in flat grinding. The results are related to the times of plasma pretreatments. The adhesion effect of polypyrrole on polyester knitted fabrics is the best when the times of plasma pretreatment is 4. Copyright No content may be reproduced or abridged without authorization.

引用

页码：97 / 101

页数：4

共 12 条

[1]

Zhang Q., Huo X., Li Q., Preparation and properties of polypyrrole conductive fabric, Journal of Beijing Institute of Fashion Technology(Natural Science Edition), 33, 4, pp. 19-24, (2013)

[2]

Li X., Qian J., Fu Z., Preparation and electrochromic properties of polyphenylamine-based conductive fabrics, Journal of Beijing Institute of Fashion Technology (Natural Science Edition), 29, 2, pp. 12-17, (2009)

[3]

Sun J., Yao L., Gao Z., Et al., Surface modification of PET films by atmospheric pressure plasma-induced acrylic acid inverse emulsion graft polymerization, Surface and Coatings Technology, 204, 24, pp. 4101-4106, (2010)

[4]

Keller M., Ritter A., Reimann P., Et al., Comparative study of plasma-induced and wet-chemical cleaning of synthetic fibers, Surface and Coatings Technology, 200, 1-4, pp. 1045-1050, (2005)

[5]

Mehmood T., Kaynak A., Daix J., Et al., Study of oxygen plasma pre-treatment of polyester fabric for improved polypyrrole adhesion, Materials Chemistry and Physics, 143, 2, pp. 668-675, (2014)

[6]

Garg S., Hurren C., Kaynak A., Improvement of adhesion of conductive polypyrrole coating on wool and polyester fabrics using atmospheric plasma treatment, Synthetic Metals, 157, 1, pp. 41-47, (2007)

[7]

Montarsolo A., Varesano A., Mossotti R., Et al., Enhanced adhesion of conductive coating on plasma-treated polyester fabric: a study on the ageing effect, Journal of Applied Polymer Science, 126, 4, pp. 1385-1393, (2012)

[8]

Jia C., Chen P., Wang Q., Et al., On-line modification of continuous fiber by atmospheric air plasma, Journal of Materials Research, 29, 1, pp. 10-16, (2015)

[9]

Ramelow U.S., Ma J.H., Darbeau R., Electrical conductivities of polypyrrole reacted with dopant solutions, Materials Research Innovations, 5, 1, pp. 40-49, (2001)

[10]

Zhu C., Ren L., Wang L., Et al., Preparation of polypyrrole/carbon black conductive composites by adsorption polymerization of carbon black, Journal of Composites, 3, pp. 45-48, (2005)

← 1 2 →