A decoupling method of powertrain mounting systems and vibration characteristics analysis of complex flexible foundations

被引：0
作者：
Sun Q. [1 ]
Liu S. [1 ]
Niu N. [1 ]
Hou L. [1 ]
Sun L. [1 ]
机构：
[1] National Demonstration Center for Experimental Mechanical Engineering Education, Shandong University, Jinan
来源：
Zhendong yu Chongji/Journal of Vibration and Shock | 2019年 / 38卷 / 12期
关键词：
Complex foundation flexibility; Finite element method; Modal vibration decoupling; Powertrain mounting system; Vibration power;
D O I：
10.13465/j.cnki.jvs.2019.12.037
中图分类号：
学科分类号：
摘要：
A dynamic model of a powertrain mounting system was derived to explore multi-dimensional coupling vibration of the powertrain. Then six degree-of-freedom natural frequencies were calculated and decoupling conditions of the most important vibration modal were confirmed. A powertrain mounting system of heavy truck was designed and verified. FEM and the power flow theory were combined to explore flexible vibration of complex foundations in engineering. Modal information of complex foundations can be obtained from FEM and taken into vibration power functions. Then vibration power transmitted in the vibration isolation system with complex flexible foundations can be obtained. The results show that obvious and dense peaks of vibration power appear because of foundation flexibility, isolation effect has deteriorated at middle and high frequencies. Foundation flexibility is essential to vibration transmission in the whole system. The increase of foundation rigidity is beneficial to vibration isolation. The new method is practically significant to explore flexible vibration isolation systems with complex foundations in engineering. © 2019, Editorial Office of Journal of Vibration and Shock. All right reserved.
引用
收藏
页码：258 / 263
页数：5
相关论文
共 16 条
  • [11] Sun L., Song K., Transmission matrix method for multi-dimensional vibration analysis of complex mechanical systems, Chinese Journal of Mechanical Engineering, 41, 4, pp. 38-43, (2005)
  • [12] Sun L., Leung A.Y.T., Lee Y.Y., Et al., Vibrational power-flow analysis of a MIMO system using the transmission matrix approach, Mechanical Systems and Signal Processing, 21, pp. 365-388, (2007)
  • [13] Sun L., Sun W., Song K., Et al., Effectiveness of a passive-active vibration isolation system with actuator constraints, Chinese Journal of Mechanical Engineering, 27, 3, pp. 567-574, (2014)
  • [14] Sun L.L., Hansen C.H., Doolan C., Evaluation of the perfor-mance of a passive-active vibration isolation system, Mechanical Systems and Signal Processing, 50-51, pp. 480-497, (2015)
  • [15] Wang X., Sun L., Yang M., Et al., Vibrational characteristics of a power machinery mounted in a circular cylindrical shell through inclined isolators, Journal of Vibration Engineering, 28, 2, pp. 227-236, (2015)
  • [16] Kim J.H., Jho S.G., Yim H.J., Influence of chassis flexibility on dynamic behavior of engine mount systems
12