Research on the shield tail clearance measurement method based on line structured light

被引：0

作者：

Huang Z. ^{[1
]}

Cheng E. ^{[1
]}

Qi P. ^{[2
]}

Yan Q. ^{[1
]}

Xu Y. ^{[1
]}

机构：

[1] School of Electronic Information and Automation, Tianjin University of Science and Technology, Tianjin

[2] School of Mechanical Engineering, Shenyang Jianzhu University, Shenyang

来源：

Yi Qi Yi Biao Xue Bao/Chinese Journal of Scientific Instrument | 2022年 / 43卷 / 05期

关键词：

Coordinate measurement; Line structured light; Machine vision; Shield tail clearance;

D O I：

10.19650/j.cnki.cjsi.J2108980

中图分类号：

学科分类号：

摘要：

The shield tail clearance is difficult to be accurately measured in real time during the on-site construction. To address this issue, this article proposes an automatic shield tail clearance measurement method based on the linear structured light. Firstly, a linear laser is used to project a narrow line-shaped indicator laser between the shield shell and the tube. The line laser image projected by the line laser between the shield shell and the tube is collected in real time through an industrial camera. Then, the target features are recognized by image processing and the end coordinates of shield tail clearance are extracted according to monocular vision imaging principle and line structured light coordinate measurement algorithm. In this way, the accurate solution of shield tail clearance value is realized. Experimental results show that the repeatability measurement accuracy of the proposed method is better than 0.3 mm, and the absolute measurement accuracy is better than 1.7 mm. This method can realize the real-time accurate measurement of the shield tail clearance within the range of 0.2~1.9 m in the depth direction of the camera, which can meet the application requirements of the urban subway tunnel construction. © 2022, Science Press. All right reserved.

引用

页码：93 / 101

页数：8

共 18 条

[11]

ZHANG L B., Research on shield tail gap measurement system of shield machine based on digital image processing technology, (2013)

[12]

ZHU J G, YU Z J., Principles and methods of vision measurement, (2012)

[13]

YU L L, LI Y W, LUAN Y B, Et al., Line structure cursor positioning based on two-dimensional plane target, Chinese Journal of Scientific Instrument, 41, 6, pp. 124-131, (2020)

[14]

LI ZH Y, CUI CH C, HUANG H, Et al., Measurement and evaluation of three-dimensional surface topography of diamond wire saw based on profile methond, Journal of Mechanical Engineering, 55, 20, pp. 107-115, (2019)

[15]

ZHANG X M, YU Q Y, ZHANG J B, Et al., Research on precision measurment methond for mobile phone tail plug part based on machine vision, Chinese Journal of Scientific Instrument, 40, 10, pp. 47-54, (2019)

[16]

TAN W, FANG M, DUAN F, Et al., Research and applicatiion of 3D laser flatness measurement system based on machine vision, Chinese Journal of Scientific Instrument, 41, 1, pp. 241-249, (2020)

[17]

TONG SH J, JIANG M, JIAO CH J., Research on an improved edge detection methond of workpiece, Journal of Electronic Measurement and Instrumentation, 35, 1, pp. 128-134, (2021)

[18]

LI W CH, YIN B Q., Research progress of automated visual surface defect detection for industrial metal planar materials, Journal of Electronic Measurement and Instrumentation, 35, 6, pp. 1-16, (2021)

← 1 2 →