Research on the shield tail clearance measurement method based on line structured light

被引：0

作者：

Huang Z. ^{[1
]}

Cheng E. ^{[1
]}

Qi P. ^{[2
]}

Yan Q. ^{[1
]}

Xu Y. ^{[1
]}

机构：

[1] School of Electronic Information and Automation, Tianjin University of Science and Technology, Tianjin

[2] School of Mechanical Engineering, Shenyang Jianzhu University, Shenyang

来源：

Yi Qi Yi Biao Xue Bao/Chinese Journal of Scientific Instrument | 2022年 / 43卷 / 05期

关键词：

Coordinate measurement; Line structured light; Machine vision; Shield tail clearance;

D O I：

10.19650/j.cnki.cjsi.J2108980

中图分类号：

学科分类号：

摘要：

The shield tail clearance is difficult to be accurately measured in real time during the on-site construction. To address this issue, this article proposes an automatic shield tail clearance measurement method based on the linear structured light. Firstly, a linear laser is used to project a narrow line-shaped indicator laser between the shield shell and the tube. The line laser image projected by the line laser between the shield shell and the tube is collected in real time through an industrial camera. Then, the target features are recognized by image processing and the end coordinates of shield tail clearance are extracted according to monocular vision imaging principle and line structured light coordinate measurement algorithm. In this way, the accurate solution of shield tail clearance value is realized. Experimental results show that the repeatability measurement accuracy of the proposed method is better than 0.3 mm, and the absolute measurement accuracy is better than 1.7 mm. This method can realize the real-time accurate measurement of the shield tail clearance within the range of 0.2~1.9 m in the depth direction of the camera, which can meet the application requirements of the urban subway tunnel construction. © 2022, Science Press. All right reserved.

引用

页码：93 / 101

页数：8

共 18 条

[1]

ZHOU SH X, LI ZH H, CHEN F L, Et al., New technology and application of shield tunnel construction in urban rail transit, Construction Technology, 49, 19, pp. 87-92, (2020)

[2]

LI Y B, GUO W ZH, GUO W T, Et al., Multi-dimension loading mechanism and experimental research of shield propulsion load simulation, Journal of Mechanical Engineering, 55, 10, pp. 207-216, (2019)

[3]

HAN R M, SONG ZH P, WU H T., Research on the influence of shield tail gap grouting on ground settlement, Journal of Xi'an University of Architecture & Technology (Natural Science Edition), 42, 3, pp. 353-357, (2010)

[4]

ZHANG X R, ZHANG K L, SHAO ZH Y, Et al., A laser radar-based shield tail gap measurement device

[5]

LU T Y, XU ZH L., Research on the vision shield tail gap measurement system based on labview, Modern Tunnel Technology, 57, 1, pp. 197-202, (2020)

[6]

LIU W, LI X, LI H, Et al., Three-dimensional measurement method of dynamic contour error of CNC machine tool based on binocular vision, Journal of Mechanical Engineering, 55, 10, pp. 1-9, (2019)

[7]

ZHAO SH F, GENG L L, DING ZH B, Et al., Research on shield tail gap measurement system based on convolutional neural network, Modern Electronic Technology, 43, 23, pp. 146-149, (2020)

[8]

WANG Y SH, ZHENG CH Y, YANG ZH Y, Et al., Shield tail gap measurement system based on high resolution camera image acquisition and processing

[9]

XIAO SH L, YU Q CH, WU J H, Et al., Shield tail gap measurement device for shield tunnel construction

[10]

LIU F X, WANG L, ZHAO ZH H, Et al., System and method for measuring shield tail gap of shield machine

← 1 2 →