Vibration transmission control of vibration source in a cylindrical shell based on piezoelectric actuator

被引:0
|
作者
He P. [1 ,2 ]
Wang S. [1 ,2 ]
Geng X. [3 ]
Xie X. [1 ,2 ]
Zhang Z. [1 ,2 ]
机构
[1] State Key Lab of Mechanical Systems and Vibration, Shanghai Jiao Tong University, Shanghai
[2] Institute of Vibration, Shanghai Jiao Tong University, Shock & Noise, Shanghai
[3] 705th Research Institute, China State Shipbuilding Co., Ltd., Xi'an
来源
关键词
active vibration control; cylindrical shell; piezoelectric actuator; vibration transmission;
D O I
10.13465/j.cnki.jvs.2024.01.029
中图分类号
学科分类号
摘要
Here, aiming at the problem of vibration transmission from vibration source inside a cylindrical shell through an annular support to shell body, a piezoelectric actuator-based active/passive support vibration isolation scheme was proposed. Vibration control analysis was performed for a vibration source-active/ passive support-shell coupled system. According to Flugge shell theory, a vibration model of a cylindrical shell was established using the wave propagation method. At the same time, a vibration model of vibration source-active/passive support was established using the finite element method. Finally, the coupled system vibration model was obtained by synthesizing substructure frequency response functions. Based on the coupled system model and ideal control assumption, the controll ability of shell vibration was given in frequency domain, and the effectiveness of control was verified by using a vibration source-active/ passive support-shell test system. Simulation and test results showed that the proposed active/passive vibration isolation scheme based on piezoelectric actuator can significantly reduce broadband and line spectrum vibration of shell. © 2024 Chinese Vibration Engineering Society. All rights reserved.
引用
收藏
页码:246 / 251
页数:5
相关论文
共 10 条
  • [1] LIU Kai, ZHU Shijian, DING Shaochun, Application and development of vibration and noise suppression technology for torpedo, Torpedo Technology, 16, 6, pp. 24-27, (2008)
  • [2] YANG Zhongchao, LOU Jingjun, SUN Jiong, Et al., Study on acoustic and vibration characteristics of underwater vehicle propulsion shafting shell system [ J ], Ship Science and Technology, 39, 12, pp. 30-35, (2017)
  • [3] XIE Xiling, REN Mingke, HUANG Xiuchang, Et al., Simulation and test for lateral vibration transmission suppression of a propulsion shafting system based on active stern support [ J ], Journal of Vibration and Shock, 39, 15, pp. 271-276, (2020)
  • [4] Xingsheng LI, GUAN Jingyan, Application of pump jet propeller in noise reduction of an underwater vehicle [ J ], Digital Ocean and Underwater Attack and Defense, 1, pp. 51-56, (2018)
  • [5] QIN Hui, ZHENG Hongbo, ZHANG Zhiyi, Lateral vibration of a propulsion shafting system install with a magnetic bearing [J], Journal of Vibration and Shock, 37, 10, pp. 129-134, (2018)
  • [6] DUAN Yong, GUO Jun, ZHOU Lingbo, Et al., Application of vibration isolation technology in underwater vehicle propulsion shafting vibration control [ J ], Journal of Underwater Unmanned Systems, 26, 1, pp. 70-77, (2018)
  • [7] DUAN Yong, LIU Ruijie, MA Lin, Application of metal rubber to the vibration control of torpedo propulsion shafting [J], Journal of Ship Mechanics, 24, 9, pp. 1187-1195, (2020)
  • [8] LIU Guijie, YAN Ru, YAO Yongkai, Et al., AUV structure power flow distribution characteristics and hull optimization design under propulsive system excitation [ J ], Journal of Vibration and Shock, 33, 19, pp. 74-80, (2014)
  • [9] XIAO Hanlin, YU Junwei, ZHANG Ruibin, Et al., Research on vibration and acoustic radiation characteristic of torpedo electric motor and stern shaft system [ J ], Torpedo Technology, 13, 4, pp. 33-36, (2005)
  • [10] YANG Yang, PAN Guang, YIN Shaoping, Et al., Verification of vibration isolation effectiveness of the underwater vehicle power plant[ J], Journal of Marine Science and Engineering, 9, (2021)