Investigation and Optimization of Process Parameters of Abrasive Water Jet Cutting on C360 Brass Alloy through Design of Experiments

被引：0

作者：

Joel C. ^{[1
]}

Joel L. ^{[2
]}

Athi Sankar P. ^{[3
]}

机构：

[1] Dept. of Mech. Engg, Easwari Engg. College, Tamil Nadu, Chennai

[2] Dept. of Mathematics, SRM Institute of Sci. and Tech, Tamil Nadu, Chennai

[3] Dept. of Mech. Engg, PSNA College of Engg. and Tech, Tamil Nadu, Dindigul

来源：

International Journal of Vehicle Structures and Systems | 2022年 / 14卷 / 03期

关键词：

ANOVA; C360 brass alloy; Design of experiments; Material removal rate; Surface roughness;

D O I：

10.4273/ijvss.14.3.21

中图分类号：

学科分类号：

摘要：

Many scientists concentrate on features of water jet cutting by researching various input parameters, abrasive mesh sizes to improve improved processing conditions without the expense. In this work, the treatment of abrasive water jet should be planned to ensure minimal surface roughness and maximum substrate removal. C360 brass alloy is considered to optimize the parameters for cutting including the abrasive feed, stand-off distance and nozzle speeds via the design of experiments supported with response surface methodology. © 2022. MechAero Foundation for Technical Research & Education Excellence.

引用

页码：387 / 390

页数：3

共 28 条

[11] Experimentation investigation of abrasive water jet machining parameters using Taguchi and Evolutionary optimization techniques
Shukla, Rajkamal
Singh, Dinesh
SWARM AND EVOLUTIONARY COMPUTATION, 2017, 32 : 167 - 183
[12] Optimization of Abrasive Water Jet Machining Process Parameters on Onyx Composite Followed by Additive Manufacturing
Ganesan, Dharmalingam
Salunkhe, Sachin
Panghal, Deepak
Murali, Arun Prasad
Mahalingam, Sivakumar
Tarigonda, Hariprasad
Gawade, Sharad Ramdas
Hussein, Hussein Mohamed Abdel-Moneam
PROCESSES, 2023, 11 (08)
[13] Experimental investigation and optimization of cutting parameters during dry turning process of copper alloy
Tefera A.G.
Sinha D.K.
Gupta G.
Journal of Engineering and Applied Science, 2023, 70 (1):
[14] Simultaneous optimization of process parameters during abrasive water jet machining on glass fibre reinforced polymer
Dahiya, Anil Kumar
Bhuyan, Basanta Kumar
Acharya, Vikas
Kaushik, Atul Kumar
Kumar, Shailendra
INTERNATIONAL JOURNAL OF INTERACTIVE DESIGN AND MANUFACTURING - IJIDEM, 2024, 18 (07): : 5077 - 5094
[15] Experimental investigation on surface characteristics of Ti6Al4V alloy during abrasive water jet machining process
Abushanab, Waheed Sami B.
Moustafa, Essam
Harish, Mooli
Shanmugan, S. H.
Elsheikh, Ammar
ALEXANDRIA ENGINEERING JOURNAL, 2022, 61 (10) : 7529 - 7539
[16] Effect of different parameters on surface roughness and material removal rate in abrasive water jet cutting of Nimonic C263
Bagchi, Arghya
Srivastava, Madhulika
Tripathi, Rupam
Chattopadhyaya, Somnath
MATERIALS TODAY-PROCEEDINGS, 2020, 27 : 2239 - 2242
[17] Optimization of Abrasive Water Jet Turning Parameters for Machining of Low Density Polyethylene Material Based on Experimental Design Method
Kartal, F.
Cetin, M. H.
Gokkaya, H.
Yerlikaya, Z.
INTERNATIONAL POLYMER PROCESSING, 2014, 29 (04) : 535 - 544
[18] Investigation and optimization of drilled surfaces machined by abrasive water jet machining in Ti-6al-4V alloy
Ramakrishnan, S.
MATERIALS AND MANUFACTURING PROCESSES, 2023, 38 (06) : 735 - 746
[19] Optimization of Process Parameters to Minimize the Surface Roughness of Abrasive Water Jet Machined Jute/Epoxy Composites for Different Fiber Inclinations
Murthy, B. R. N.
Makki, Emad
Potti, Srinivasa Rao
Hiremath, Anupama
Bolar, Gururaj
Giri, Jayant
Sathish, T.
JOURNAL OF COMPOSITES SCIENCE, 2023, 7 (12):
[20] Optimization of machining parameters by Taguchi approach for machining of aluminium based metal matrix composite by abrasive water jet machining process
Shunmugasundaram, M.
Reddy, M. Yadi
Kumar, A. Praveen
Rajanikanth, K.
MATERIALS TODAY-PROCEEDINGS, 2021, 47 : 5928 - 5933

← 1 2 3 →