Fault Diagnosis of Rolling Bearing Based on Adaptive Variational Mode Decomposition and Second‑Order Frequency-Weighted Energy Operator

被引：0
|
作者：
Wang X. [1 ]
Wen J. [1 ]
Ni Z. [1 ]
Wu R. [1 ]
机构：
[1] School of Mechanical Engineering, Xi'an Jiaotong University, Xi'an
来源：
Zhendong Ceshi Yu Zhenduan/Journal of Vibration, Measurement and Diagnosis | 2023年 / 43卷 / 02期
关键词：
fault diagnosis; rolling bearing; second-order frequency-weighted energy operator; variational modal decomposition;
D O I：
10.16450/j.cnki.issn.1004-6801.2023.02.006
中图分类号：
学科分类号：
摘要：
In view of the problem that the vibration signal of rolling bearing often contains harmonics，Gaussian white noise and non-periodic transient impact components，which makes it difficult to extract fault features，a fault diagnosis method is proposed based on the combination of adaptive variational mode decomposition （AVMD）and second-order frequency weighted energy operator（SFWEO）. The method firstly determines the number of modes and penalty factors adaptively according to different signals，and decomposes the original signal with parameter-optimized variational mode decomposition（VMD）to obtain multiple instrinsic mode function（IMF）. Secondly，the time-frequency weighted kurtosis of each mode component is calculated to select the best IMF according to the time-frequency weighted kurtosis maximization criterion. Finally， the second-order frequency weighted energy operator is used to demodulate the best IMF. Simulation and experimental results show that the proposed method overcomes the problem that the resolution accuracy of the traditional VMD algorithm is greatly affected by the parameters，which leads to the signal over-decomposition or under-decomposition. At the same time，the second-order frequency-weighted energy operator has a good suppression effect on the interference components in the signal，and effectively improves the diagnostic accuracy. © 2023 Nanjing University of Aeronautics an Astronautics. All rights reserved.
引用
收藏
页码：246 / 253and406
相关论文
共 14 条
  • [1] CHEN Kai, LI Fucai, LI Hongguang, Fast adaptive empirical mode decomposition method and bearing fault diagnosis［J］, Journal of Vibration，Measurement & Diagnosis, 36, 4, pp. 647-652, (2016)
  • [2] ZHANG Kun, MA Chaoyong, XU Yonggang, Et al., Application of fast adaptive local mean decomposition and bearing fault diagnosis［J］, Journal of Vibration Engineering, 33, 1, pp. 206-212, (2020)
  • [3] CHEN J, Et al., An integrated method based on CEEMD-SampEn and the correlation analysis algorithm for the fault diagnosis of a gearbox under different working conditions ［J］, Mechanical Systems and Signal Processing, 113, pp. 102-111, (2018)
  • [4] DRAGOMIRETSKIY K，, ZOSSO D., Variational mode decomposition［J］, IEEE transactions on signal processing, 62, 3, pp. 531-544, (2013)
  • [5] WANG H, Et al., Periodic impulses extraction based on improved adaptive VMD and sparse code shrinkage denoising and its application in rotating machinery fault diagnosis［J］, Mechanical Systems and Signal Processing, 126, 1, pp. 568-589, (2019)
  • [6] TANG Guiji, Application of parameter optimization variational modal decomposition method in early fault diagnosis of rolling bearings［J］, Journal of Xi′an Jiaotong University, 49, 5, pp. 73-81, (2015)
  • [7] LIU Changliang, WU Yingjie, ZHEN Chenggang, Rolling bearing fault diagnosis based on variational mode decomposition and fuzzy C-means clustering［J］, Proceedings of the Chinese Society of Electrical Engineering, 35, 13, pp. 3358-3365, (2015)
  • [8] WANG X B, YANG Z X, YAN X A., Novel particle swarm optimization-based variational mode decomposition method for the fault diagnosis of complex rotating machinery［J］, IEEE/ASME Transactions on Mechatronics, 23, 1, pp. 68-79, (2017)
  • [9] YI C, DANG Z., A fault diagnosis scheme for rolling bearing based on particle swarm optimization in variational mode decomposition［J］, Shock and Vibration, 5, pp. 1-10, (2016)
  • [10] WANG H，, Et al., Adaptive variational mode decomposition method for signal processing based on mode characteristic［J］, Mechanical Systems & Signal Processing, 107, pp. 53-77, (2018)
12