Effect of polybutylene succinate on properties of polylactic acid-based wood-plastic composites

被引：0

作者：

Liu J. ^{[1
,4
]}

Zhao X. ^{[2
]}

Li Q. ^{[1
,4
]}

Wei D. ^{[3
]}

Lei Z. ^{[1
,4
]}

Zhang Z. ^{[1
,4
]}

机构：

[1] College of Material Science and Art Design, Inner Mongolia Agricultural University, Hohhot

[2] College of Mechanical and Electrical Engineering, Inner Mongolia Agricultural University, Hohhot

[3] College of Forestry, Inner Mongolia Agricultural University, Hohhot

[4] Inner Mongolia Key Laboratory of Sandy Shrubs Fibrosis and Energy Development and Utilization, Hohhot

来源：

Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica | 2024年 / 41卷 / 05期

基金：

中国国家自然科学基金;

关键词：

mechanical properties; polybutylene succinate; polylactic acid; thermal performance; wood plastic composites;

D O I：

10.13801/j.cnki.fhclxb.20230831.002

中图分类号：

学科分类号：

摘要：

In order to solve the problems of high preparation cost, poor toughness and heat resistance of polylactic acid (PLA)-based wood-plastic composites, biodegradable resin polybutylene succinate (PBS) was used as a modified resin, which was blended with Salix powder (WF) and PLA to prepare environmentally friendly PBS-WF/PLA ternary degradable wood-plastic composites by compression molding. The results show that the addition of PBS can improve the toughness, heat resistance and thermal stability of the composites, but the strength and stiffness decrease. When the addition amount of PBS is 50wt% of the total resin, the comprehensive properties of PBS-WF/PLA composites are relatively better. Compared with WF/PLA, the production cost is reduced by about 20%. The retention rates of static bending strength, elastic modulus and tensile strength of PBS-WF/PLA are 86.5%, 63.8% and 73.1%, respectively. The impact strength is increased by 40.1%, and the Vicat softening temperature, thermal deformation temperature and the initial temperature of the second stage of thermal decomposition are increased by 37.1℃, 53.7℃ and 4.1℃, respectively. © 2024 Beijing University of Aeronautics and Astronautics (BUAA). All rights reserved.

引用

页码：2445 / 2454

页数：9

共 39 条

[31]

YU Qiuhao, SHAN Haixia, HUANG Hongwei, Et al., Structure and performance of polylactic acid/poly(butyric acid butyl glycol ester)/diphenylmethane diisocyanate mixing system, Polymer Materials Science and Engineering, 36, 3, pp. 59-65, (2020)

[32]

ZHANG Xiaona, Synthysis and cure kinetics of imine and 1, 4-dihydroxy-benzene liquid crystalline epoxy resins, (2009)

[33]

YANG Haoran, ZHANG Rongxi, DUAN Tongsheng, Et al., Preparation and properties of PLA/PBS blends with high toughness and heat resistance[J], Engineering Plastics Application, 50, 6, pp. 25-30, (2022)

[34]

LI Xiangyu, GUO Yufang, ZHANG Qingqing, Et al., Effect of PEG on microstructure and properties of PLA/PBS blend[J], Plastics, 48, 6, pp. 46-50, (2019)

[35]

YOKOHARA T, YAMAGUCHI M., Structure and properties for biomass-based polyester blends of PLA and PBS[J], European Polymer Journal, 44, 3, pp. 677-685, (2008)

[36]

HU Jianpeng, GUO Minghui, Influence of ammonium lignosulphonate on mechanical and thermal properties of polylactic acid/wood fiber biodegradable composites, Acta Materiae Compositae Sinica, 32, 3, pp. 657-664, (2015)

[37]

LIM L T, AURAS R, RUBINO M., Processing technologies for poly(lactic acid)[J], Progress in Polymer Science, 33, 8, pp. 820-852, (2008)

[38]

ZHENG Qianren, Preparation and properties of bamboo fiber/PLA/PBS composites, (2022)

[39]

CHUAYJULJIT S, WONGWAIWATTANAKUL C, CHAIWUTTHINAN P, Et al., Biodegradable poly(lactic acid)/poly (butylene succinate)/wood flour composites: Physical and morphological properties[J], Polymer Composites, 38, 12, pp. 2841-2851, (2017)

← 1 2 3 4 →