Large deflection dynamic response of (fiber/polymer)-metal laminates subjected to impact loading

被引：0

作者：

Li K. ^{[1
]}

Zhang J. ^{[1
]}

Zhang W. ^{[1
]}

Xia Y. ^{[1
]}

Li J. ^{[1
]}

Sha Z. ^{[1
]}

Qin Q. ^{[1
]}

机构：

[1] State Key Laboratory for Strength and Vibration of Mechanical Structures, School of Aerospace, Xi'an Jiaotong University, Xi'an

来源：

Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica | 2020年 / 37卷 / 01期

关键词：

(fiber/polymer)-metal laminate; Dynamic response; Impact loading; Large deflection; Rigid-perfectly plastic model;

D O I：

10.13801/j.cnki.fhclxb.20190425.003

中图分类号：

TU3 [建筑结构];

学科分类号：

081304 ; 081402 ;

摘要：

Large deflection dynamic response of fully clamped square and circular (fiber/polymer)-metal laminates subjected to impact loading was studied theoretically. Based on rigid-perfectly plastic assumption and the plastic limit yield condition, theoretical models of the large deflection dynamic response of (fiber/polymer)-metal laminates subjected to mass impact and blast loading were developed and analytical solutions which considered the interaction between bending and stretching were obtained. Furthermore, the membrane model solutions which neglected effect of bending moment were given. The results show that good agreement between theoretical predictions and experimental results is achieved. The theoretical models can predict the maximum deflections of (fiber/polymer)-metal-laminates subjected to mass impact and explosion loading effectively. © 2020, Editorial Office of Acta Materiae Compositae Sinica. All right reserved.

引用

页码：147 / 154

页数：7

共 20 条

[1]

Tao J., Li H.G., Pan L., Et al., Review on research and development of fiber metal laminates, Journal of Nanjing University of Aeronautics & Astronautics, 47, 5, pp. 626-636, (2015)

[2]

Vlot A., Vogelesang L.B., Vries T.J.D., Towards application of fibre metal laminates in large aircraft, Aircraft Engineering & Aerospace Technology, 71, 6, pp. 558-570, (1999)

[3]

Vlot A., Impact loading on fibre metal laminates, International Journal of Impact Engineering, 18, 3, pp. 291-307, (1996)

[4]

Abdullah M.R., Cantwell W.J., The impact resistance of polypropylene-based fibre-metal laminates, Composites Science & Technology, 66, 11, pp. 1682-1693, (2006)

[5]

Sadighi M., Alderliesten R.C., Benedictus R., Impact resistance of fiber-metal laminates: A review, International Journal of Impact Engineering, 49, 49, pp. 77-90, (2012)

[6]

Karagiozova D., Langdon G.S., Nurick G.N., Et al., Simulation of the response of fibre-metal laminates to localised blast loading, International Journal of Impact Engineering, 37, 6, pp. 766-782, (2010)

[7]

Moriniere F.D., Alderliesten R.C., Benedictus R., Low-velocity impact energy partition in GLARE, Mechanics of Materials, 66, pp. 59-68, (2013)

[8]

Starikov R., Assessment of impact response of fiber metal laminates, International Journal of Impact Engineering, 59, 3, pp. 38-45, (2013)

[9]

Langdon G.S., Cantwell W.J., Guan Z.W., Et al., The response of polymeric composite structures to air-blast loading: A state-of-the-art, International Materials Reviews, 59, 3, pp. 159-177, (2014)

[10]

Chen Y., Pang B.J., Zheng W., Et al., Tests and numerical simulation on low velocity impact performance of fiber metal laminates, Acta Materiae Compositae Sinica, 31, 3, pp. 733-740, (2014)

← 1 2 →