Research on the icing position of inlet of marine gas turbine

被引:0
作者
Wang Y. [1 ]
Yu X. [1 ]
Wang M. [1 ]
Chen W. [1 ]
Wang Z. [1 ]
机构
[1] College of Power and Energy Engineering, Harbin Engineering University, Harbin
来源
Harbin Gongcheng Daxue Xuebao/Journal of Harbin Engineering University | 2023年 / 44卷 / 06期
关键词
droplet collection efficiency; flow field; icing; inlet; marine gas turbine; numerical simulation; wind direction; wind speed;
D O I
10.11990/jheu.202201016
中图分类号
学科分类号
摘要
The effects of wind speed and inlet wind directions on marine gas turbine inlet icing are studied by numerical simulation. The flow field, water impact coefficient, and icing law in the inlet under different wind speeds and inlet wind directions are also analyzed. The results showed that the main icing positions include the arc area of the inlet shaft and the shrinking part of the connection between the inlet shaft and the pressure-stabilizing box. The droplet collection efficiency and average icing coefficient under low wind speed conditions are higher than those under high wind speed conditions so that droplets easily freeze in the air inlet. When the wind direction is 135°, the mass of the ice deposition is the largest in the air inlet. © 2023 Editorial Board of Journal of Harbin Engineering. All rights reserved.
引用
收藏
页码:995 / 1003
页数:8
相关论文
共 21 条
[1]  
ADDY H, POTAPCZUK M, SHELDON D., Modern airfoil ice accretions, 35th Aerospace Sciences Meeting and Exhibit, (1997)
[2]  
BOURGAULT Y, HABASHI W, DOMPIERRE J, Et al., An Eulerian approach to supercooled droplets impingement calculations, 35th Aerospace Sciences Meeting and Exhibit, (1997)
[3]  
HAMED A, DAS K, BASU D., Numerical simulations of ice droplet trajectories and collection efficiency on aero-engine rotating machinery, 43rd AIAA Aerospace Sciences Meeting and Exhibit, (2005)
[4]  
GAURAV C, LI Ri, Freezing of water droplets on solid surfaces: an experimental and numerical study, Experimental thermal and fluid science, 57, pp. 86-93, (2014)
[5]  
VU T V, TRYGGVASON G, HOMMA S, Et al., Numerical investigations of drop solidification on a cold plate in the presence of volume change, International journal of multiphase flow, 76, pp. 73-85, (2015)
[6]  
LI Dashu, Numerical analysis on air entrapment during a droplet impacts on a dry flat surface, International journal of heat and mass transfer, 115, pp. 186-193, (2017)
[7]  
OKAWA T, KAWAI K, KUBO K, Et al., Fundamental characteristics of secondary drops produced by early splash during single-drop impingement onto a thick liquid film, Experimental thermal and fluid science, 131, (2022)
[8]  
SUBRAMANI N, SANGEETHA M, KENGAIAH V, Et al., Numerical modeling on dynamics of droplet in aircraft wing structure at different velocities, Aircraft engineering and aerospace technology, 94, 4, pp. 553-558, (2022)
[9]  
NORDE E, WEIDE E, HOEIJMAKERS H., Eulerian method for in-engine icing: with application to ice crystal trajectories and impact in a generic turbofan compressor [J], International council of the aeronautical sciences, 322, pp. 1-10, (2016)
[10]  
OZGEN S, UGUR N, Et al., Ice accretion simulations on airfoils [ C], Progress in Flight Physics, pp. 107-126, (2017)