Inductive oil detecting sensor based on magnetic nanomaterial

被引：0
|
作者：
Bai C.-Z. [1 ]
Zhang H.-P. [1 ]
Zeng L. [1 ]
Zhao X.-P. [1 ]
Wang W.-Q. [1 ]
Yang D.-X. [2 ]
机构：
[1] College of Marine Engineering, Dalian Maritime University, Dalian
[2] Science and Technology on Integrated Logistics Support Laboratory, National University of Defense Technology, Changsha
来源：
Guangxue Jingmi Gongcheng/Optics and Precision Engineering | 2019年 / 27卷 / 09期
关键词：
Contaminants detection; Inductive sensor; Magnetic nanomaterial; Microfluidic;
D O I：
10.3788/OPE.20192709.1960
中图分类号：
学科分类号：
摘要：
In order to increase the stability of the inductive oil contaminant detection sensor and improve the detection accuracy of ferromagnetic and nonferromagnetic contaminants, an inductive oil contaminant detection sensor with built-in magnetic nanoparticles was designed in this paper. The solenoid coil was filled with a nanoparticle layer which adsorbs the pollutant particles and enhanced the magnetic field strength of the detection area, enhancing the magnetization and eddy current effects. A 300 μm microchannel was made using the model material, which passes through the sensing unit. Ferromagnetic and non-ferromagnetic contaminants can be distinguished when contaminants pass through the microchannel through the sensing unit. At the same time, two sets of contrast experiments were carried out using two sensors with and without magnetic nanoparticle layers. The experimental results show that the inductive oil detection sensor of magnetic nanomaterial has higher detection accuracy and lower detection limit. The detection accuracy of ferromagnetic particles of 20-70 μm improved by 20%-25%, while that of nonferromagnetic particles of 80-130 μm improved by 16%-25%. The method is based on microfluidic detection technology, and has the advantages of small volume and high detection precision. At the same time, it provides technical support for the rapid detection of hydraulic oil contaminants, which has great significance for fault diagnosis and life prediction of hydraulic systems. © 2019, Science Press. All right reserved.
引用
收藏
页码：1960 / 1967
页数：7
相关论文
共 19 条
  • [1] Niu Y.B., Chen G.M., Studying status and developing trend of on-line wear particle monitoring sensor technology, Sensor World, 14, 9, (2008)
  • [2] Wu S.Y., Wang S.F., The sources, harms of hydraulic oil pollution and their controlled measures, Equipment Manufacturing Technology, 3, pp. 80-82, (2008)
  • [3] Zhang H.P., Huang W., Zhang Y.D., Et al., Design of the microfluidic chip of oil detection, Applied Mechanics and Materials, 117-119, pp. 517-520, (2011)
  • [4] Zhang R.C., Yu X., Hu Y.L., Et al., Active control of hydraulic oil contamination to extend the service life of aviation hydraulic system, The International Journal of Advanced Manufacturing Technology, 96, 5-8, pp. 1693-1704, (2018)
  • [5] Zhou T., Liu Y.L., Guo J.Y., Et al., Experiments of hydraulic oil contamination and on-line monitoring models, Chinese Hydraulics & Pneumatics, 11, pp. 72-75, (2017)
  • [6] Zhang Y., Si E.W., Li G.S., Et al., Design and experimental study of metal particle sensors for lubricating oils, Lubrication Engineering, 42, 4, pp. 89-94, (2017)
  • [7] Tucker J.E., Galie T.R., Schultz A., Et al., LASERNET fines optical wear debris monitor: a Navy shipboard evaluation of CBM enabling technology, 54th Mach. Fail. Prev. Technol. Proc., 191, pp. 445-452, (2000)
  • [8] Xu C., Zhang P.L., Ren G.Q., Et al., Output characteristic of a novel online ultrasonic wear debris sensor, Tribology, 35, 1, pp. 90-95, (2015)
  • [9] Zarepour H., Yeo S.H., Single abrasive particle impingements as a benchmark to determine material removal modes in micro ultrasonic machining, Wear, 288, pp. 1-8, (2012)
  • [10] Hadi M., Influence of size of abrasive particles in conveyor liquid on ultrasonic cavitation machining process, Applied Mechanics and Materials, 87, pp. 155-158, (2011)
12