STRUCTURE OPTIMIZATION AND ENERGY SAVING POTENTIAL INVESTIGATION OF NOVEL INTERGRATED VENTILATED PV ROOF

被引：0

作者：

Peng J. ^{[1
]}

Zhang Q. ^{[1
]}

Zhou C. ^{[2
]}

Zhang S. ^{[2
]}

Zhang F. ^{[3
]}

Luo Y. ^{[1
]}

机构：

[1] College of Civil Engineering, Hunan University, Changsha

[2] Longi Green Energy Technology Co.，Ltd., Xi’an

[3] Center International Group Co.，Ltd., Beijing

来源：

Taiyangneng Xuebao/Acta Energiae Solaris Sinica | 2023年 / 44卷 / 12期

关键词：

BAPV; BIPV; energy saving; photovoltaic; roof; structure optimization; thermoelectric properties;

D O I：

10.19912/j.0254-0096.tynxb.2023-1334

中图分类号：

学科分类号：

摘要：

A novel integrated ventilated photovoltaic roof was proposed in the paper. To optimize the structure of the roof, a CFD model was established and verified by experiments. With the CFD model, the effect of the heat dissipation channel height H and module spacing D on the temperature distribution of the PV roof were investigated. The results show that the increase of H and D can strengthen the heat dissipation of the PV roof and effectively improve its power generation efficiency. Considering both of the heat dissipation effect and structural reliability, the optimal H and D are calculated to be 50 mm and 100 mm respectively. Furthermore, the heat transfer and energy generation characteristics of the PV roof were simulated with EnergyPlus. Compared to the conventional roof, its heat gain in summer and heat loss in winter were reduced by 48.0% and 27.1% in Xi’an, and the annual energy saving potential was as high as 198.0 kWh/m2. © 2023 Science Press. All rights reserved.

引用

页码：24 / 32

页数：8

共 18 条

[1]

DOMINGUEZ A, KLEISSL J, LUVALL J C., Effects of solar photovoltaic panels on roof heat transfer[J], Solar energy, 85, 9, pp. 2244-2255, (2011)

[2]

POULEK V, MATUSKA T, LIBRA M, Et al., Influence of increased temperature on energy production of roof integrated PV panels[J], Energy and buildings, 166, pp. 418-425, (2018)

[3]

BRINKWORTH B J, SANDBERG M., Design procedure for cooling ducts to minimise efficiency loss due to temperature rise in PV arrays, Solar energy, 80, 1, pp. 89-103, (2006)

[4]

ZHU Q Z, SI L L, JIANG T Y., Economical and environmental analysis of building photovoltaic systems with different installation styles, Acta energiae solaris sinica, 33, 1, pp. 24-29, (2012)

[5]

LONG W Z., Design of photoelectric roof structure, Architecture technology, 43, 4, pp. 294-299, (2012)

[6]

WANG W L, LIU Y S, WU X F, Et al., Environmental assessments and economic performance of BAPV and BIPV systems in Shanghai[J], Energy and buildings, 130, pp. 98-106, (2016)

[7]

YANG H Y, ZHU Z J, BURNETT J, Et al., A simulation study on the energy performance of photovotaic roofs, ASHRAE Transactions, 107, 2, pp. 129-135, (2001)

[8]

BRINKWORTH B J, CROSS B M, MARSHALL R H, Et al., Thermal regulation of photovoltaic cladding[J], Solar energy, 61, 3, pp. 169-178, (1997)

[9]

LI X G, ZHENG J, CHEN S Q, Et al., Attached PV roof’s temperature with FEM simulation, Building energy efficiency, 43, 8, pp. 22-24, (2015)

[10]

KAPSALIS V, KARAMANIS D., On the effect of roof added photovoltaics on building’s energy demand[J], Energy and buildings, 108, pp. 195-204, (2015)

← 1 2 →