Structures and materials of system-in-package: A review

被引：0
作者：
Tian W. [1 ]
Wang C. [1 ]
Zhao Z. [1 ]
Cui H. [1 ]
机构：
[1] School of Electro-Mechanical Engineering, Xidian University, No. 2, TaiBai South Road, Xi’an, Shaanxi
来源：
Recent Patents on Mechanical Engineering | 2021年 / 14卷 / 01期
基金：
美国国家科学基金会; 中国国家自然科学基金;
关键词：
Die stacking; Dielectric and interconnect materials; Package stacking; Substrate materials; System in Package (SiP); Thermal interface materials;
D O I：
10.2174/2212797613999200728190605
中图分类号：
学科分类号：
摘要：
Background: As a new type of advanced packaging and system integration technology, System-in-Package (SiP) can realize the miniaturization and multi-functionalization of electronic products and is listed as an important direction of development by International Technology Roadmap for Semiconductors (ITRS). Objective: This paper mainly introduces and discusses recent academic research and patents on package structure and packaging materials. Additionally, the trend of development is described. Methods: Firstly, we analyze and summarize the challenges and existing problems in SiP. Then the corresponding solutions are introduced with respect to packaging structure and packaging materials. Finally, the research status of SIP and some patents in these aspects are reviewed. Results: In order to increase the density of internal components, SiP products need to use a stacked structure. The causes of different performance in SiP products are: 1) the stress concentration and bonding quality problems caused by the chip stack structure; 2) the warpage and package thickness problems caused by the package stack; 3) thermal conductivity of materials and thermal mismatch between materials; and 4) dielectric properties and thermomechanical reliability of materials. The following solutions are summarized: 1) structural optimization of chip stacking and packaging stacking; 2) application of new packaging technology; 3) optimization of packaging materials; 4) and improvement of packaging material processing technology. Conclusion: With the study of packaging structure and packaging materials, SiP can meet the requirements of the semiconductor industry and have great future prospects. © 2021 Bentham Science Publishers.
引用
收藏
页码：28 / 41
页数：13
相关论文
共 109 条
[1]  
Edenfeld D, Kahng AB, Rodgers M, Zorian Y., Technology roadmap for semiconductors, Computer, 37, 1, pp. 47-56, (2004)
[2]  
Cognetti C., The third revolution in semiconductor packaging and system integration, IEEE International Conference on Electronics, Circuits and Systems, (2008)
[3]  
Hu Y, Cai J, Liqiang C, Lingzhi C, Ziyu L, Lulu S, Et al., The research status and development trends of System in Package (SiP) technology, Equip Electron Prod Manuf, 41, 11, pp. 1-6, (2012)
[4]  
Agonafer D, Kaisare A, Hossain MM, Lee YJ, Dewan-Sandur BP, Dishongh T, Et al., Thermo-mechanical challenges in stacked packaging, Heat Transf Eng, 29, 2, pp. 134-148, (2008)
[5]  
Wenchao T, Jianglei H., High-power and high-reliability RF MEMS switch review, Recent Pat Mech Eng, 7, 2, pp. 1-8, (2016)
[6]  
Wenchao T, Qiang C, Jing S., Reconfigurable antennas based on RF MEMS switches, Recent Pat Mech Eng, 9, 3, pp. 230-240, (2016)
[7]  
Wenchao T, Xiaotong Z, Zhiqiang C., Performance analysis of MEMS phase shifters based on RF MEMS switches: A review, Recent Pat Mech Eng, 10, 2, pp. 126-139, (2016)
[8]  
Kuang R, Fei X., Research of orthogonal test on 25μm gold wire bonding, Semicond Technol, 35, 4, pp. 369-372, (2010)
[9]  
Beica R, Siblerud P, Sharbono C, Bernt M., Advanced metallization for 3D integration, Electronics Packaging Technology Conference, (2008)
[10]  
Yu SY, Kwon YM, Kim J, Jeone T, Choi S, Paik KW., Studies on the thermal cycling reliability of BGA System-in-Package (SiP) with an embedded die, IEEE Trans Compon Packaging Manuf Technol, 2, 4, pp. 625-633, (2012)
12345678910