Effect of rotor slotting on electromagnetic vibration of permanent magnet motor under tooth modulation

被引：0

作者：

Gu Y. ^{[1
]}

Liu Z. ^{[1
]}

Chen C. ^{[1
]}

Huang F. ^{[1
]}

机构：

[1] School of Mechanical Engineering, Shenyang University of Technology, Shenyang

来源：

Dianji yu Kongzhi Xuebao/Electric Machines and Control | 2024年 / 28卷 / 05期

关键词：

electromagnetic vibration; fractional-slot concentrated-winding; interior permanent-magnet synchronous motor; radial electromagnetic force wave; rotor surface slotting; tooth modulation;

D O I：

10.15938/j.emc.2024.05.012

中图分类号：

学科分类号：

摘要：

To study the effect of slotting on the rotor surface under the action of tooth modulation on the electromagnetic vibration of a permanent magnet synchronous motor, the frequency and spatial order characteristics of the radial electromagnetic force wave were derived by Maxwell’s stress tensor method using low power fractional-slot concentrated-winding (FSCW) interior permanent-magnet synchronous motor (IPMSM) as the object of study. The process of modulation of spatial high-order electromagnetic force waves into low-order electromagnetic force waves by tooth modulation in FSCW-IPMSM was analyzed, and the connection between the rotor surface slotting and electromagnetic vibration under the influence of tooth modulation was given. It is shown that the change in the slotted structure of the rotor surface causes a difference in the magnetic field of each harmonic, which in turn changes the amplitude of the high-order electromagnetic force wave represented by the pole-order electromagnetic force wave. Under the effect of tooth modulation, these high-order electromagnetic force waves were modulated into low-order electromagnetic force waves of higher amplitude and cause low-order vibrations of different amplitudes. A 10-pole, 12-slot FSCW-IPMSM electromagnetic and structural finite element analysis model with two different rotor surface slotted structures of C-type and V-type was developed and simulated. The results show that the pole-order, namely, the 10th-order electromagnetic force wave, is modulated to the 2nd order and causes the 2nd-order vibration, and there is a difference of up to 22. 1% in the electromagnetic vibration between the two different slotted structures. Finally, vibration experiments were conducted on a 10-pole 12-slot prototype to verify the theoretical and simulation analysis results. © 2024 Editorial Department of Electric Machines and Control. All rights reserved.

引用

页码：111 / 118

页数：7

共 19 条

[1]

(2009)

[2]

MA Weiming, WANG Dong, CHENG Siwei, Et al., Common basic scientific problems and development of leading-edge technology of high performance motor system [J], Proceedings of the CSEE, 36, 8, (2016)

[3]

GIERAS J F, WANG Chong, LAI J C., Noise of polyphase electric motors, (2006)

[4]

(2021)

[5]

(2019)

[6]

YU Shenbo, ZHONG Shuangshuang, ZHAO Haining, Et al., Methods of reducing noise of permanent magnet synchronous, Electric Machines and Control, 22, 7, (2018)

[7]

HAN Xueyan, ZHANG Xingang, ZHU Longfei, Et al., Measures to reduce vibration and noise of interior permanent magnet synchronous motor with multilayer permanent magnets, Electric Machines and Control, 25, 8, (2021)

[8]

HU Sujun, ZHANG Tong, WANG Xinjian, The effect of rotor’ s design on the characteristics of permanent magnet synchronous motor, Mechatronics, 23, 4, (2017)

[9]

FANG Haiyang, LI Dawei, QU Ronghai, Et al., Modulation effect of slotted structure on vibration response in electrical machines [J], IEEE Transactions on Industrial Electronics, 66, 4, (2019)

[10]

PILE R, LEMANCH Y, LEBESNERAIS J, Et al., Study of the combined effects of the air-gap transfer for Maxwell Tensor and the tooth mechanical modulation in electrical machines, IEEE Transactions on Magnetics, 56, 1, (2020)

← 1 2 →