Investigation on the small signal characteristic based on the LLC hybrid hysteretic charge control

被引：9

作者：

Yang R. ^{[1
]}

McDonald B.A. ^{[2
]}

Li Y. ^{[2
]}

机构：

[1] Texas Instruments China, Konka R&D Building, Guangdong, Shenzhen

[2] Texas Instruments, Dallas, TX

来源：

CPSS Transactions on Power Electronics and Applications | 2019年 / 4卷 / 02期

关键词：

Analytical small signal model; Hybrid hysteretic charge (HHC); Hybrid hysteretic charge control; LLC; UCC25630;

D O I：

10.24295/CPSSTPEA.2019.00013

中图分类号：

学科分类号：

摘要：

In this paper, an analytical small-signal model applied for hybrid hysteretic charge (HHC) control has been proposed and analyzed with the advantages over direct frequency control (DFC). Based on the approach of extended describing function method and average concept, for the first time, the systematical analytical open loop transfer functions from control to output, input to output, output impedance and the closed transfer functions of the overall loop, audio susceptibility and output impedance are proposed and verified through simulation. Additionally, some important physical insights have been extracted, analyzed and verified. Finally, the experiments on a design example of 12 VDC&12 A output power are conducted and verified. It shows that the calculations match well with the results from both the simulation and experiment, which reveals the proposed analytical transfer functions are very useful for the practical power design to achieve good prediction result. © IEEE 2021. All rights reserved.

引用

页码：128 / 142

页数：14

共 33 条

[1]

Yang B., Lee F.C., Zhang A.J., Huang G., LLC resonant converter for front end DC/DC conversion, APEC. Seventeenth Annual IEEE Applied Power Electronics Conference and Exposition (Cat. No.02CH37335), pp. 1108-1112, (2002)

[2]

Yang B., Lee F.C., Small-signal analysis of LLC Resonant Converter, Proceedings of Center for Power Electronics System Seminar, pp. 1-6, (2003)

[3]

Lu B., Liu W., Liang Y., Lee F.C., van Wyk J.D., Optimal design methodology for LLC resonant converter, Twenty-First Annual IEEE Applied Power Electronics Conference and Exposition, 2006. APEC '06, (2006)

[4]

Adragna C., de Simone S., Spini C., A design methodology for LLC resonant converters based on inspection of resonant tank currents, 2008 Twenty-Third Annual IEEE Applied Power Electronics Conference and Exposition, pp. 1361-1367, (2008)

[5]

Fang X., Hu H., Shen J., Batarseh I., An optimal design of the LLC resonant converter based on peak gain estimation, 2012 Twenty-Seventh Annual IEEE Applied Power Electronics Conference and Exposition (APEC), pp. 1286-1291, (2012)

[6]

Fang X., Et al., Efficiency-oriented optimal design of the LLC resonant converter based on peak gain placement, IEEE Transactions on Power Electronics, 28, 5, pp. 2285-2296, (2013)

[7]

Middlebrook R.D., Cuk S., A general unified approach to modelling switching-converter power stages, 1976 IEEE Power Electronics Specialists Conference, pp. 18-34, (1976)

[8]

Ridley R., A New Continuous-Time Model for Current Mode Control, (1990)

[9]

Tian S., Equivalent Circuit Model of High Frequency PWM and Resonant Converters, (2015)

[10]

Yang R., Hung T., Wang P., An accurate small-signal model with peak current mode control applied for the Active clamp forward converter used in the constant conduction mode, 2014 International Power Electronics and Application Conference and Exposition, pp. 243-250, (2014)

← 1 2 3 4 →