Modal analysis of bus body structure using finite element analysis technique

被引：0

作者：

Deulgaonkar V.R. ^{[1
]}

Kulkarni M.S. ^{[1
]}

Khedkar S.S. ^{[1
]}

Kharosekar S.U. ^{[1
]}

Sadavarte V.U. ^{[1
]}

机构：

[1] Dept. of Mech. Engg., MM’s College of Engg., Karvenagar, Pune

来源：

International Journal of Vehicle Structures and Systems | 2020年 / 12卷 / 03期

关键词：

Dynamic analysis; Finite Element Analysis (FEA); Modal analysis;

D O I：

10.4273/ijvss.12.3.18

中图分类号：

学科分类号：

摘要：

Present work deals with evaluation of dynamic characteristics of a bus body structure. The bus under consideration is a sleeper non-air conditioned vehicle for a passenger capacity of thirty and it is designed adhering to automotive industry standards. Modal analysis of the proposed bus design is carried using Ansys Workbench. With the aid of modal analysis ten mode shapes of the bus are postulated, corresponding frequencies and deflections are estimated. Mesh generator is used to mesh the complex bus model. The deflection and frequency magnitudes of proposed bus model is found with the help of Finite Element Analysis (FEA) technique and they are in good agreement with experimental results available in literature. Engine being the prime source of excitation, it’s frequency is compared with the frequencies determined by FEA of the proposed bus body and it is observed that the frequencies of the bus body for ten different modes are far less than the minimum resonant engine frequency. © 2020. MechAero Foundation for Technical Research & Education Excellence.

引用

页码：317 / 321

页数：4

共 22 条

[11]

Deulgaonkar V.R., Finite element analysis of vehicle mounted hydraulically leveled platform, Int. J. Manuf. Sci. and Engg, 1, 2, pp. 25-33, (2010)

[12]

Deulgaonkar V.R., Bhatnagar S., Karve A., Kelkar V., Development and design validation of pneumatic tool for stem seal and collet fitment of SL-90 engine cylinder head, Int. J. Manuf. Sci. and Engg, 2, 1, pp. 53-56, (2011)

[13]

Chavan D.K., Tasgaonkar G.S., Deulgaonkar V.R., Mechatronics-A boon for technological development, Int. J. Mech. and Production Engg. Research and Develop, 1, 2, pp. 66-75, (2011)

[14]

Matani A.G., Deulgaonkar V.R., Mechanics of strain propagation in members of a platform structure devised for intense load, Int. J. Mech. Engg, 2, 4, pp. 29-34, (2013)

[15]

Matani A.G., Deulgaonkar V.R., Kallurkar S.P., An investigation of structural integrity of chassis mounted platform subjected to concentrated load during braking, Int. J. Mech. Engg. and Tech, 4, 1, pp. 115-122, (2013)

[16]

Bijagre V., Deulgaonkar V.R., Modeling and finite element analysis for a casting defect in thin wall structures, Int. J. Emerging Engg. Research and Tech, 3, 5, pp. 77-82, (2015)

[17]

Bijagre V.A., Deulgaonkar V.R., Bijagre A.A., Finite element simulation and investigation of thin wall impeller casting, Int. J. Advance Research and Innovative Ideas in Education, 1, 5, pp. 778-784, (2015)

[18]

Kallurkar S.P., Matani A.G., Deulgaonkar V.R., Noise and vibrations in automobiles: Review and diagnostics, Int. J. Mech. and Production Engg. Research and Develop, 1, 2, pp. 76-88, (2011)

[19]

Deulgaonkar V.R., Finite element analysis and experimental simulation of chassis mounted platform for off-road wheeled combat and transport utility vehicles, Int. J. Vehicle Structures and Systems, 10, 1, pp. 66-72, (2018)

[20]

Kunlolienkar A.S., Deulgaonkar V.R., Optimization in mechanical seal design for API 682 category 1 applications, Int. J. Advance Research and Innovative Ideas in Education, 1, 5, pp. 945-952, (2015)

← 1 2 3 →