Rolling Forming Process with Internal and External Local Constraints for Inner Ring Gear

被引：0
|
作者：
Zhang D. [1 ,2 ]
Lu K. [2 ]
Zhao S. [1 ,2 ]
Li F. [1 ,2 ]
机构：
[1] Xi’an Key Laboratory of Intelligent Equipment and Control, Xi’an Jiaotong University, Xi’an
[2] School of Mechanical Engineering, Xi’an Jiaotong University, Xi’an
来源：
Jixie Gongcheng Xuebao/Journal of Mechanical Engineering | 2022年 / 58卷 / 20期
关键词：
finite element method; inner ring gear; internal and external constraints; motion characteristics; rolling forming;
D O I：
10.3901/JME.2022.20.221
中图分类号：
学科分类号：
摘要：
A new efficient rolling method with internal and external local constraints for manufacturing inner ring gear has been developed in this study. The frame of the new rolling process has been constructed, and the motion characteristics of inner rolling die, outer rolling die and workpiece are analyzed. The experimental platform with two pairs of rolling dies is developed, and the rolling process of inner ring gear was implemented. The finite element (FE) model of the rolling process with internal and external local constraints for inner ring gear is developed, and the finite element analyses with two pairs and three pairs of rolling dies are carried out. The experimental and FE results indicated that the profile of inner gear is full and clear, and the height of inner gear meets designed height, so the proposed rolling process of inner gear is feasible. Compared with the height of inner gear obtained by experiment, predictive error of FE model is less than 5%. By means of proper adjustments for geometries of die and billet, the rolled height of inner gear can be controlled and the forming quality of end of inner gear can be improved. The results provide a theoretical basis and useful guideline for manufacturing inner complex-profile part with high efficiency and saving force. © 2022 Editorial Office of Chinese Journal of Mechanical Engineering. All rights reserved.
引用
收藏
页码：221 / 230
页数：9
相关论文
共 29 条
  • [1] ZHANG Dawei, Theory and technology of thread and spline synchronous rolling, (2020)
  • [2] ZHANG Dawei, ZHAO Shengdun, WANG Limin, Current status of rolling forming machine for complex profile, Journal of Netshape Forming Engineering, 11, 1, pp. 1-10, (2019)
  • [3] ZHANG S W, ZHANG D W, WANG Y F, Et al., The planetary rolling process of forming the internal thread, International Journal of Advanced Manufacturing Technology, 107, pp. 3543-3551, (2020)
  • [4] SAWAKI Y, YOSHIDA H, MORI S., Shaping of internal geared parts by extrusion, Transactions of the Japan Society of Mechanical Engineers Series C, 61, 589, pp. 3716-3721, (1995)
  • [5] LI Jianping, XIA Xiangsheng, WAN Yuanyuan, Et al., Technical research on cold extrusion of large size internal gear, Forging & Stamping Technology, 38, 3, pp. 7-11, (2013)
  • [6] ROBINSON M, KUHN H A., A workability analysis of the cold forging of gears with integral teeth, Journal of Mechanical Working Technology, 1, 3, pp. 215-230, (1978)
  • [7] CHOI J, CHO H, CHOI J, Et al., A study on the forging of gear-like components, KSME International Journal, 12, 4, pp. 615-623, (1998)
  • [8] HAIDER M, PATHAK K K, AGNIHOTRI G., Preform design for near net shape close die gear forging using simulation technique, Archives of Applied Science Research, 2, 6, pp. 317-324, (2010)
  • [9] ABD-ELTWAB A A, EL-AVDEN S Z, AHMED K I E, Et al., An investigation into forming internally-splines by ball spinning, International Journal of Mechanical Sciences, 134, pp. 399-410, (2017)
  • [10] GROCHE P, FRITSCHE D., Application and modelling of flow forming manufacturing processes for internally geared wheels, International Journal of Machine Tool & Manufacture, 46, pp. 1261-1265, (2006)
123