Influence of the gas model on the boundary layer characteristic parameters and transition prediction for the Mars entry capsule

被引:0
作者
Chen Z. [1 ,2 ]
Miao W. [1 ,2 ]
Li Q. [3 ]
Zhu Z. [1 ,2 ]
Ai B. [1 ,2 ]
机构
[1] China Academy of Aerospace Aerodynamics, Beijing
[2] Laboratory of Aero-thermal Protection Technology for Aerospace Vehicles (LAPTAV), China Aerospace Science and Technology Corporation (CASC), Beijing
[3] Beijing Institute of Spacecraft System Engineering, Beijing
来源
Zhongguo Kexue Jishu Kexue/Scientia Sinica Technologica | 2022年 / 52卷 / 02期
关键词
Mars entry capsule; Thermodynamic nonequilibrium flow; Transition prediction;
D O I
10.1360/SST-2021-0476
中图分类号
学科分类号
摘要
Turbulent transition is an important factor affecting the thermal environment of spacecraft. A boundary layer transition prediction method was developed for both smooth and rough thermal protection system surfaces of a large-scale entry capsule in the process of entering the Martian atmosphere. The effects of the gas model and wall temperature constraints on the boundary layer characteristic parameters and transition features were analyzed. The results indicate that the dissociation reaction of carbon dioxide and its thermodynamic non-equilibrium effect will lead to increases in the momentum thickness Reynolds number and the roughness-height-based Reynolds number of the boundary layer. The radiative-equilibrium wall temperature constraint also results in a higher momentum thickness Reynolds number and roughness-height-based Reynolds number compared to those of the cold wall conditions. Therefore, the thermochemical non-equilibrium and radiative-equilibrium wall temperature boundary condition should be included in the analysis model to obtain the actual transition features. © 2022, Science China Press. All right reserved.
引用
收藏
页码:292 / 302
页数:10
相关论文
共 15 条
[1]  
Ingoldby R N, Michel F C, Flaherty T M, Et al., Entry data analysis for Viking landers 1 and 2 final report, (1976)
[2]  
Spence D A, Blanchard R C, Thuman S W, Et al., Mars Pathfinder atmospheric entry reconstruction, 8th AAS/AIAA Space Flight Mechanics Meeting, (1998)
[3]  
Edquisk K T, Desai P N, Schoenenberger M., Aerodynamics for the Mars Phoenix entry capsule, AIAA/AAS Astrodynamics Specialist Conference and Exhibit, (2008)
[4]  
Braun R D, The Mars Science Laboratory entry, descent and landing system, J Spacecraft Rockets, 51, (2014)
[5]  
Yana C, Baroukh J, Kerjean L, Et al., Operations of the seismometer (SEIS) onboard the 2016 InSight mission to Mars, SpaceOps 2014 Conference, (2014)
[6]  
Dyakonov A A, Schoenenberger M, VanNorman J W., Hypersonic and supersonic static aerodynamic of Mars Science Laboratory entry vehichle, 43nd AIAA Thermophysics Conference, (2012)
[7]  
Edquist K T, Hollis B R, Johnston C O, Et al., Mars science laboratory heat shield aerothermodynamics: Design and reconstruction, J Spacecraft Rockets, 51, pp. 1106-1124, (2014)
[8]  
Hollis B R, Blunt-body entry vehicle aerotherodynamics: Transition and turbulent heating, J Spacecraft Rockets, 49, pp. 435-449, (2012)
[9]  
Bose D, White T, Mahzari M, Et al., Reconstruction of aerothermal environment and heat shield response of Mars science laboratory, J Spacecraft Rockets, 51, pp. 1174-1184, (2014)
[10]  
Beck R A S, Driver D M, Wright M J, Et al., Development of the Mars science laboratory heatshield thermal protection system, J Spacecraft Rockets, 51, pp. 1139-1150, (2014)