Non-premixed Combustion of Parallel Multiple Jets in Scarfing Process

被引:1
作者
Li Y.-M. [1 ,2 ]
Li B.-K. [1 ]
Qi F.-S. [1 ]
机构
[1] School of Metallurgy, Northeastern University, Shenyang
[2] School of Engineering, Shenyang Agricultural University, Shenyang
来源
Dongbei Daxue Xuebao/Journal of Northeastern University | 2019年 / 40卷 / 04期
关键词
Jet merging; Multiple jets; Non-premixed combustion; Numerical simulation; Scarfing;
D O I
10.12068/j.issn.1005-3026.2019.04.010
中图分类号
学科分类号
摘要
A remote-controlled combustion test bench was set up to investigate the non-premixed combustion process of natural gas and oxygen, and the temperature distribution of multiple jets combustion flame was analyzed by the indirect temperature measurement. The Realizable k-ε turbulence model was used to study the flow field characteristics of parallel multiple jets, and the equilibrium chemical reaction model was used to study the non-premixed combustion process of jet. The numerical results have good agreement with those from the experiments. The results indicateed that the entraining and merging behaviors of multiple jets could promote the combustion action. The parallel 45 jets tend to form dual-jet combinations near the nozzle exit. Interactions and re-combinations of the jets could take place during further flowing and eventually form 3 strong flames in the downstream. © 2019, Editorial Department of Journal of Northeastern University. All right reserved.
引用
收藏
页码:505 / 509
页数:4
相关论文
共 12 条
[1]  
Choi D.C., Jeon Y.J., Kim S.W., Faulty scarfing slab detection using machine vision, Advanced Materials Research, 462, pp. 185-190, (2012)
[2]  
Moustafa G.H., Experimental investigation of high-speed twin jets, AIAA Journal, 32, 11, pp. 2320-2322, (1994)
[3]  
Faghani E., Rogak S.N., A phenomenological model of two circular turbulent jets, International Journal of Engine Research, 14, 3, pp. 293-304, (2013)
[4]  
Li Y.M., Li B.K., Qi F.S., Et al., Numerical investigation of the interaction of the turbulent dual-jet and acoustic propagation, Chinese Physics B, 26, 2, pp. 294-304, (2017)
[5]  
Li Y.M., Li B.K., Qi F.S., Et al., Flow and heat transfer of parallel multiple jets obliquely impinging on a flat surface, Applied Thermal Engineering, 133, pp. 588-603, (2018)
[6]  
Marsten G.F., Measurements in the flow field of a linear array of rectangular nozzles, Journal of Aircraft, 17, 11, pp. 774-780, (1980)
[7]  
Krothapalli A., Baganoff D., Karamcheti K., Development and structure of a rectangular jet in a multiple jet configuration, AIAA Journal, 18, 8, pp. 945-950, (1980)
[8]  
Pani B., Dash R., Three-dimensional single and multiple free jets, Journal of Hydraulic Engineering, 109, 2, pp. 254-269, (1983)
[9]  
Wang J.Y., Priestman G.H., Wu D.D., An analytical solution for incompressible flow through parallel multiple jets, Journal of Fluids Engineering, 123, 2, pp. 407-410, (2001)
[10]  
Showalter M.S., Nemchinsky V.A., Khan J.A., Fundamental study of oxygen scarfing process, American Society of Mechanical Engineers, 323, 1, pp. 233-238, (1996)