Evaluation of fracture morphology of shale in Brazilian tests and analysis of power spectral characteristics

被引：0

作者：

Ban Y.-X. ^{[1
,2
]}

Fu X. ^{[3
,4
]}

Xie Q. ^{[1
,2
]}

Zhou X.-P. ^{[1
,2
]}

机构：

[1] School of Civil Engineering, Chongqing University, Chongqing

[2] Key Laboratory of New Technology for Construction of Cities in Mountain Area of the Ministry of Education, Chongqing University, Chongqing

[3] Key Laboratory of Hydraulic and Waterway Engineering of the Ministry of Education, Chongqing Jiaotong University, Chongqing

[4] Key Laboratory of Geotechnical Mechanics and Engineering of the Ministry of Water Resources, Changjiang River Scientific Research Institute of Changjiang Water Resources Commission, Wuhan

来源：

Yantu Gongcheng Xuebao/Chinese Journal of Geotechnical Engineering | 2019年 / 41卷 / 12期

关键词：

Acoustic emission; Bedding layer; Digital image correlation; Dominant frequency; Fracture morphology; Power spectrum; Shale;

D O I：

10.11779/CJGE201912016

中图分类号：

学科分类号：

摘要：

The quantitative evaluation of the fracture morphology of shale is an important prerequisite for assessing the complexity of hydraulic fracturing fracture networks. The Brazilian tests coupled with digital image correlation and acoustic emission technique are conducted on black shale, the corresponding relationships between the characteristics of the frequency band of acoustic emission power spectra and the micro-damage mechanism of rock specimens are established, and the fracture morphology is quantitatively evaluated. The results show that the bedding layer leads to the differences of power spectral characteristics, micro-damage mechanism and fracture morphology of shale. The tension and shear failures of shale matrix induce high-frequency acoustic emission signals, and the tension and shear failures of shale bedding induce low-frequency acoustic emission signals. With the increase of the angle between the bedding layer and the loading direction, the dominant frequencies and the secondary dominant frequencies gradually diffuse from the low-frequency band to the high-frequency one, and the quantitative ratio of high frequency to low frequency H:L gradually increases. The H:L of 0° shale specimen is 4.28%:95.72%, and the fracture is a straight line in shape; the H:L of 30° and 60° shale specimens are 15.89%:84.11% and 36.93%:63.07%, respectively, and their fractures are arched in shape; the H:L of 90° specimen is 93.85%:6.15%, and the fracture is a composited arc-straight line in shape. The results can provide references for analyzing in situ micro-seismic data and a theoretical basis for controlling fracture trajectory in hydraulic fracturing in shale reservoirs. © 2019, Editorial Office of Chinese Journal of Geotechnical Engineering. All right reserved.

引用

页码：2307 / 2315

页数：8

共 32 条

[1]

Gao F., Xie H.-P., Ju Y., Et al., Unconventional theories and strategies for fracturing treatments of shale gas strata, Journal of Sichuan University (Engineering Science Edition), 44, 6, pp. 1125-1130, (2012)

[2]

Wang H.-Z., Shen Z.-H., Li G.-S., Feasibility analysis on shale gas exploitation with supercritical CO<sub>2</sub> , Petroleum Drilling Techniques, 39, 3, pp. 30-35, (2011)

[3]

Zheng Z.-M., Knowledge on the engineering science of China's shale gas sustainable development, Science China, 61, 1, pp. 34-35, (2016)

[4]

Jia C.-G., Li S.-M., Wang H.-T., Et al., Shale reservoir network fracturing technology research and experiment, Engineering Sciences, 14, 6, pp. 106-112, (2012)

[5]

Chen T.-Y., Feng X.-T., Zhang X.-W., Et al., Experimental study on mechanical and anisotropic properties of black shale, Chinese Journal of Rock Mechanics and Engineering, 33, 9, pp. 1772-1779, (2014)

[6]

Wang Y., Wang L., Wang J., Et al., Investigating microstructure of Longmaxi shale in Shizhu area, Sichuan Basin, by optical microscopy, scanning electron microscopy and micro-computed tomography, Nuclear Science and Techniques, 28, 11, pp. 1-10, (2017)

[7]

Meier T., Rybacki E., Backers T., Et al., Influence of bedding angle on borehole stability: a laboratory investigation of transverse isotropic oil shale, Rock Mechanics and Rock Engineering, 48, 4, pp. 1535-1546, (2015)

[8]

Hou P., Gao F., Yang Y.-G., Et al., Effect of bedding orientation on failure of black shale under Brazilian tests and energy analysis, Chinese Journal of Geotechnical Engineering, 38, 5, pp. 930-937, (2016)

[9]

Heng S., Yang C.-H., Zeng Y.-J., Et al., Experimental study on hydraulic fracture geometry of shale, Chinese Journal of Geotechnical Engineering, 34, 7, pp. 1243-1251, (2014)

[10]

Kao J.-W., Jin Y., Fu W.-N., Et al., Experimental research on the morphology of hydraulic fractures in deep shale under high difference of in-situ horizontal stresses, Chinese Journal of Rock Mechanics and Engineering, 37, 6, pp. 1332-1339, (2018)

← 1 2 3 4 →