Fault location of HVDC transmission lines based on waveform similarity analysis

被引:0
作者
Li B. [1 ]
Zhang J. [1 ]
Liu H. [1 ]
Li Y. [1 ]
机构
[1] Key Laboratory of Smart Grid of Ministry of Education, Tianjin University, Tianjin
来源
Dianli Zidonghua Shebei/Electric Power Automation Equipment | 2019年 / 39卷 / 09期
基金
中国国家自然科学基金;
关键词
Differential current; Electric fault location; HVDC power transmission; Time shift; Transmission line; Waveform similarity;
D O I
10.16081/j.epae.201909001
中图分类号
学科分类号
摘要
In order to overcome the shortcomings of the traveling wave fault location principle that performs worse in high-resistance fault and requires extremely high sampling frequency, a fault location method based on waveform similarity for HVDC(High Voltage Direct Current) power transmission lines is proposed. Based on the functional relationship between positive and negative differential currents and fault point current, the waveform similarity between positive and negative differential currents is analyzed by using Pearson correlation coefficient and the corresponding information of fault location is extracted. The proposed method takes use of time-domain information of voltages and currents at both ends, is less affected by the transition resistance and noise, and shows high reliability. PSCAD/EMTDC simulation verifies that the proposed method can achieve accurate fault location of the full length of power transmission line. © 2019, Electric Power Automation Equipment Press. All right reserved.
引用
收藏
页码:27 / 32and53
页数:3226
相关论文
共 14 条
[1]  
Wang S., Zhao Y., Travelling-wave fault location of double-pole HVDC transmission system, High Voltage Engineering, 33, 7, pp. 124-128, (2007)
[2]  
Liu B., Hu Y., Ruan J., Et al., Power cable fault locating based on frequency difference character of wavelet analysis, Electric Power Automation Equipment, 29, 3, pp. 22-27, (2009)
[3]  
Gu Y., Wang Y., Fault location based on wavelet transform and mathematical morphology for double-circuit transmission lines, Electric Power Automation Equipment, 31, 12, pp. 34-38, (2011)
[4]  
Shu H., Cheng C., Zhao W., Et al., Accurate traveling-wave front detection based on morphology and HHT, Electric Power Automation Equipment, 29, 7, pp. 1-7, (2009)
[5]  
Liao K., He Z., Li X., Fault location for HVDC transmission line based on the natural frequency of traveling wave, Automation of Electric Power Systems, 37, 3, pp. 104-109, (2013)
[6]  
Liu K., Shu H., Yu J., Et al., Fault location based on wavelet energy spectrum and neural network for ± 800 kV UHVDC transmission line, Electric Power Automation Equipment, 34, 4, pp. 141-147, (2014)
[7]  
Mohammad F., Javad S., A novel fault-location method for HVDC transmission lines based on similarity measure of voltage signals, IEEE Transactions on Power Delivery, 28, 4, pp. 2483-2490, (2013)
[8]  
Xuan W., Zhang Y., Chen X., Et al., Grounding fault location of transmission line by traveling wave differential current, Journal of Tianjin University(Science and Technology), 49, 6, pp. 639-645, (2016)
[9]  
Jiale S., Shuping G., Guobing S., Et al., A novel fault-location method for HVDC transmission lines, IEEE Transactions on Power Delivery, 25, 2, pp. 1203-1209, (2010)
[10]  
Feng T., Dong X., Performance test method of two-terminal traveling wave fault location, Electric Power Automation Equipment, 38, 9, pp. 114-120, (2018)