Interface regulation and properties of boron nitride nanosheets reinforced copper matrix composites

被引：0
|
作者：
Li Z. [1 ]
Yi J. [1 ]
You X. [1 ]
Li C. [1 ]
Bao R. [1 ]
Liu L. [1 ]
机构：
[1] Faculty of Materials Science and Engineering, Kunming University of Science and Technology, Kunming
来源：
Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica | 2024年 / 41卷 / 05期
关键词：
boron nitride nanosheets; copper matrix composites; interface regulation; mechanical property; wear-resisting property;
D O I：
10.13801/j.cnki.fhclxb.20230828.001
中图分类号：
学科分类号：
摘要：
Copper has a wide application prospect in brush and contact materials because of its high conductivity and high ductility. With the rapid development of power transmission industry, the disadvantage of low strength of copper itself cannot meet the demand, and it is urgent to develop a high-strength and high-toughness copper matrix composite material (CMCs) to make up for the defects of copper materials. Boron nitride nanosheets (BNNSs) is expected to be used as good reinforcements for copper matrix composites due to its excellent mechanical properties and high temperature structural stability. In this study, BNNSs reinforced copper matrix composites (BNNSs/Cu) with high comprehensive properties were prepared by powder metallurgy. Microstructure and interface evolution characteristics of composites at different heat treatment temperatures, as well as the changes of mechanical, electrical and tribological properties were studied. The results show that by matrix microalloying (adding 1wt%Ti) and heat treatment, the dense and uniform TiN interfacial transition layer and nano-TiB whisker are formed at the interface of BNNSs, which improve the interfacial bonding between BNNSs and matrix. Ultimate tensile strength (UTS) of BNNSs/Cu-(Ti)-900℃ is 408 MPa, the elongation (EL) is 15.5% and the conductivity remains high level of 91% International Annealed Copper Standard (IACS) and the friction coefficient is 0.58 (pure Cu is 0.8). BNNSs/Cu-(Ti) prepared in this study display excellent mechanical properties and wear resistance while maintaining good conductivity, which provide the technical guidance for high performance electrical materials. © 2024 Beijing University of Aeronautics and Astronautics (BUAA). All rights reserved.
引用
收藏
页码：2683 / 2693
页数：10
相关论文
共 28 条
  • [1] SU Huaguang, Overview of application and processing technology of conductor copper and copper alloy, Wire and Cable, 5, pp. 22-29, (2022)
  • [2] PAN Xincheng, LIN Zhengqi, YANG Liu, Et al., Research progress on preparation technology and properties of graphene reinforced copper matrix composites, Materials for Mechanical Engineering, 47, 1, pp. 1-10, (2023)
  • [3] WANG Yuanwen, XIAO Wenqing, ZHOU Hongjun, Et al., Preparation, modification and application of hexagonal boron nitride, New Chemical Materials, 50, 12, pp. 32-37, (2022)
  • [4] HAGHSHENAS M, ISLAM R, WANG Y, Et al., Depth sensing indentation of magnesium/boron nitride nanocomposites[J], Journal of Composite Materials, 53, 13, pp. 1751-1763, (2019)
  • [5] YOO S C, KIM J, LEE W, Et al., Enhanced mechanical properties of boron nitride nanosheet/copper nanocomposites via a molecular-level mixing process[J], Composites Part B: Engineering, 195, (2020)
  • [6] ZANG C, YANG M, LIU E B, Et al., Synthesis, characterization and tribological behaviors of hexagonal boron nitride/copper nanocomposites as lubricant additives[J], Tribology International, 165, (2022)
  • [7] MA L S, ZHANG X, DUAN Y H, Et al., Constructing the coherent transition interface structure for enhancing strength and ductility of hexagonal boron nitride nanosheets/Al composites[J], Journal of Materials Science & Technology, 145, pp. 235-248, (2023)
  • [8] BHUIYAN M M H, LI L H, WANG J T, Et al., Interfacial reactions between titanium and boron nitride nanotubes[J], Scripta Materialia, 127, pp. 108-112, (2017)
  • [9] MEREIB D, SEU U C C, ZAKHOUR M, Et al., Fabrication of biomimetic titanium laminated material using flakes powder metallurgy[J], Journal of Materials Science, 53, 10, pp. 7857-7868, (2018)
  • [10] CORTHAY S, KUTZHANOV M K, MATVEEV A T, Et al., Nanopowder derived Al/h-BN composites with high strength and ductility, Journal of Alloys and Compounds, 912, (2022)
123