Experimental and numerical investigation on the thermal and mechanical behaviours of thermal barrier coatings exposed to CMAS corrosion

被引:0
作者
Dongxu LI [1 ]
Peng JIANG [1 ]
Renheng GAO [2 ]
Fan SUN [1 ]
Xiaochao JIN [1 ]
Xueling FAN [1 ]
机构
[1] State Key Laboratory for Strength and Vibration of Mechanical Structures, School of Aerospace Engineering, Xi'an Jiaotong University
[2] AEEC Sichuan Gas Turbine
关键词
D O I
暂无
中图分类号
TG174.4 [金属表面防护技术];
学科分类号
摘要
Calcium–magnesium–alumino–silicate(CMAS) corrosion is a critical factor which causes the failure of thermal barrier coating(TBC). CMAS attack significantly alters the temperature and stress fields in TBC, resulting in their delamination or spallation. In this work, the evolution process of TBC prepared by suspension plasma spraying(SPS) under CMAS attack is investigated. The CMAS corrosion leads to the formation of the reaction layer and subsequent bending of TBC. Based on the observations, a corrosion model is proposed to describe the generation and evolution of the reaction layer and bending of TBC. Then, numerical simulations are performed to investigate the corrosion process of free-standing TBC and the complete TBC system under CMAS attack. The corrosion model constructs a bridge for connecting two numerical models. The results show that the CMAS corrosion has a significant influence on the stress field, such as the peak stress, whereas it has little influence on the steady-state temperature field. The peak of stress increases with holding time,which increases the risk of the rupture of TBC. The Mises stress increases nonlinearly along the thick direction of the reaction layer. Furthermore, in the traditional failure zone, such as the interface of the top coat and bond coat, the stress obviously changes during CMAS corrosion.
引用
收藏
页码:551 / 564
页数:14
相关论文
共 50 条
  • [21] Comparison of CMAS corrosion and sintering induced microstructural characteristics of APS thermal barrier coatings
    Wu, Yiyou
    Luo, Hua
    Cai, Canying
    Wang, Yanguo
    Zhou, Yichun
    Yang, Li
    Zhou, Guangwen
    JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2019, 35 (03) : 440 - 447
  • [22] Failure of Thermal Barrier Coatings Subjected to CMAS Attack
    L. Li
    N. Hitchman
    J. Knapp
    Journal of Thermal Spray Technology, 2010, 19 : 148 - 155
  • [23] Experimental and numerical investigation on gas turbine blade with the application of thermal barrier coatings
    Aabid, Abdul
    Jyothi
    Zayan, Jalal Mohammed
    Khan, Sher Afghan
    ADVANCES IN MATERIALS RESEARCH-AN INTERNATIONAL JOURNAL, 2019, 8 (04): : 275 - 293
  • [24] Real-time Detection of CMAS Corrosion Failure in APS Thermal Barrier Coatings Under Thermal Shock
    W. Zhu
    Z. Y. Li
    L. Yang
    Y. C. Zhou
    J. F. Wei
    Experimental Mechanics, 2020, 60 : 775 - 785
  • [25] Numerical investigation of the effect of CMAS deposition on the temperature and stress distribution of thermal barrier coatings coated on a turbine blade
    Liu, X. H.
    Zhu, W.
    Guo, J. W.
    Xiao, Y. Q.
    AEROSPACE SCIENCE AND TECHNOLOGY, 2023, 140
  • [26] CMAS-Resistant Thermal Barrier Coatings (TBC)
    Rai, Amarendra K.
    Bhattacharya, Rabi S.
    Wolfe, Douglas E.
    Eden, Timothy J.
    INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY, 2010, 7 (05) : 662 - 674
  • [27] Failure of Thermal Barrier Coatings Subjected to CMAS Attack
    Li, L.
    Hitchman, N.
    Knapp, J.
    JOURNAL OF THERMAL SPRAY TECHNOLOGY, 2010, 19 (1-2) : 148 - 155
  • [28] Crystallization behavior of CMAS and NaVO3+CMAS mixture and its potential effect to thermal barrier coatings corrosion
    Zhang, Xinmu
    Yu, Yang
    Sun, Jingyong
    Xin, Hui
    Ye, Fuxing
    Guo, Lei
    CERAMICS INTERNATIONAL, 2021, 47 (22) : 31868 - 31876
  • [29] The mechanical and thermal properties, CMAS corrosion resistance, and the wettability of novel thermal barrier material GdTaO4
    Yang, Wenqi
    Ye, Fuxing
    CERAMICS INTERNATIONAL, 2021, 47 (20) : 28685 - 28697
  • [30] CMAS corrosion resistance of YSZ thermal barrier coatings enhanced by Pt-Al films
    Wang, Jinshuang
    Lu, Xianjun
    Shu, Chaoxi
    Duan, Zhixing
    Dong, Shujuan
    Lu, Guoqiang
    Zhang, Yixing
    Yuan, Fuhe
    Cao, Xueqiang
    CERAMICS INTERNATIONAL, 2024, 50 (03) : 5111 - 5120