Study on the Shear Performance of the Interface between Post-Cast Epoxy Resin Concrete and Ordinary Concrete

被引:0
|
作者
Chen, Peiqi [1 ,2 ]
Wang, Hao [1 ,2 ]
Zhou, Xiaojie [1 ,2 ]
Zhao, Shilong [1 ,2 ]
机构
[1] Tianjin Key Lab Civil Bldg Protect & Reinforcement, Tianjin 300384, Peoples R China
[2] Tianjin Chengjian Univ, Sch Civil Engn, Tianjin 300384, Peoples R China
基金
中国国家自然科学基金;
关键词
epoxy resin concrete; interface; shear performance; experiment; finite element; BOND STRENGTH; JOINTS; ROUGHNESS; SUBSTRATE;
D O I
10.3390/buildings14092852
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
The interface of fresh-aged concrete represents a critical vulnerability within monolithic assembled monolithic concrete structures. In this paper, the shear performance of the interface between post-cast epoxy resin concrete and standard concrete is studied using experimental methods and finite element analysis. The objective is to furnish empirical data that support the broader adoption of epoxy resin concrete in assembled structures. A direct shear experiment of 19 Z-shaped samples and a computation of 20 finite element models were completed. The results from both experimental and computational analyses provided insights into several factors influencing the shear performance at the interface. These factors include the pre-cast part of concrete strength, the friction coefficient of the interface, the longitudinal reinforcement ratio at the interface, the compressive strength of concrete in the post-cast part, and confining stress. The findings indicate that utilizing epoxy resin concrete for post-cast material, roughing the interface, and setting keyways can enhance the shear performance of the interface so that it equals or even exceeds the cast-in situ sample. Optimal shear results are obtained when the compressive strength of the post-cast epoxy resin concrete closely matches that of the pre-cast conventional cement. Moreover, increasing the depth of the keyways rather than their width is more effective in improving the shear capacity of the sample. It is recommended that the depth of the keyway should be at least 30 mm, and its width should be no less than three times the depth. As the longitudinal reinforcement ratio at the interface increases, there is an enhancement in shear capacity coupled with a reduction in deformative performance. It is advisable to maintain this ratio below 1.0% to balance the strength and ductility effectively.
引用
收藏
页数:31
相关论文
共 50 条
  • [1] Research on Work Performance of Monolithic Precast Concrete Shear Walls with Post-Cast Epoxy Resin Concrete
    Chen, Peiqi
    Liu, Zihao
    Zhou, Xiaojie
    Xu, Shuo
    Wang, Junyi
    BUILDINGS, 2024, 14 (06)
  • [2] Optimization of Shear Resistance in Horizontal Joints of Prefabricated Shear Walls through Post-Cast Epoxy Resin Concrete Applications
    Chen, Peiqi
    Zhao, Shilong
    Xu, Pengzhan
    Zhou, Xiaojie
    Li, Yueqiang
    BUILDINGS, 2024, 14 (10)
  • [3] Interface shear resistance of precast keyway UHPC and post-cast normal concrete
    Wang P.
    Zhao M.
    Tian L.
    Pan C.
    Chen C.
    Fu N.
    Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica, 2024, 41 (05): : 2633 - 2644
  • [4] An Experimental Study on Flexural-Shear Behavior of Composite Beams in Precast Frame Structures with Post-Cast Epoxy Resin Concrete
    Chen, Peiqi
    Xu, Shuo
    Zhou, Xiaojie
    Xu, Dezong
    BUILDINGS, 2023, 13 (12)
  • [5] Study on shear bond behavior of post-cast normal concrete and precast UHPC
    Wang D.
    Shen T.
    Ju Y.
    Zheng W.
    Zeng C.
    Jianzhu Jiegou Xuebao/Journal of Building Structures, 2020, 41 : 411 - 419
  • [7] Experimental study on shear performance of bubble groove interface between precast UHPC and post cast normal concrete
    Guan D.
    Chen Z.
    Lin Z.
    Xu R.
    Liu J.
    Guo Z.
    Jianzhu Jiegou Xuebao/Journal of Building Structures, 2021, 42 : 426 - 432and455
  • [8] Shear experimental study on the bonded interface properties between autoclaved aerated concrete and ordinary concrete
    Sun J.
    Zhang J.
    Wang K.
    Harbin Gongye Daxue Xuebao/Journal of Harbin Institute of Technology, 2017, 49 (08): : 141 - 145
  • [9] A study on the bond strength of interface between post-fire concrete and different epoxy resin adhesives
    Guo, Xiao
    Xie, Kaizhong
    Liu, Zhenwei
    Elchalakani, Mohamed
    Zhou, Yiming
    CONSTRUCTION AND BUILDING MATERIALS, 2023, 407
  • [10] Study on pavement performance of epoxy resin concrete
    Liu, Kefei
    Dongnan Daxue Xuebao (Ziran Kexue Ban)/Journal of Southeast University (Natural Science Edition), 2009, 39 (SUPPL. 2): : 274 - 278