Probing electronic and dielectric properties of ultrathin Ga2O3/Al2O3 atomic layer stacks made with in vacuo atomic layer deposition

Ultrathin (1-4 nm) films of wide-bandgap semiconductors are important to many applications in microelectronics, and the film properties can be sensitively affected by defects especially at the substrate/film interface. Motivated by this, an in vacuo atomic layer deposition (ALD) was developed for the synthesis of ultrathin films of Ga2O3/Al2O3 atomic layer stacks (ALSs) on Al electrodes. It is found that the Ga2O3/Al2O3 ALS can form an interface with the Al electrode with negligible interfacial defects under the optimal ALD condition whether the starting atomic layer is Ga2O3 or Al2O3. Such an interface is the key to achieving an optimal and tunable electronic structure and dielectric properties in Ga2O3/Al2O3 ALS ultrathin films. In situ scanning tunneling spectroscopy confirms that the electronic structure of Ga2O3/Al2O3 ALS can have tunable bandgaps (E-g) between similar to 2.0 eV for 100% Ga2O3 and similar to 3.4 eV for 100% Al2O3. With variable ratios of Ga:Al, the measured E-g exhibits significant non-linearity, agreeing with the density functional theory simulation, and tunable carrier concentration. Furthermore, the dielectric constant epsilon of ultrathin Ga2O3/Al2O3 ALS capacitors is tunable through the variation in the ratio of the constituent Ga2O3 and Al2O3 atomic layer numbers from 9.83 for 100% Ga2O3 to 8.28 for 100% Al2O3. The high epsilon leads to excellent effective oxide thickness similar to 1.7-2.1 nm for the ultrathin Ga2O3/Al2O3 ALS, which is comparable to that of high-K dielectric materials. (c) 2024 Author(s). All article content, except where otherwise noted, is licensed under a Creative Commons Attribution (CC BY) license(https://creativecommons.org/licenses/by/4.0/).