Investigation of mechanical properties of Cu/SiC composite fabricated by FSP: Effect of SiC particles' size and volume fraction

被引：259

作者：

Barmouz, M. ^{[1
]}

Asadi, P. ^{[1
]}

Givi, M. K. Besharati ^{[1
]}

Taherishargh, M. ^{[2
]}

机构：

[1] Univ Tehran, Coll Engn, Sch Mech Engn, Tehran, Iran

[2] Amir Kabir Univ Technol, Sch Min & Met Engn, Tehran, Iran

来源：

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2011年 / 528卷 / 03期

关键词：

FSP; Copper; MMC; Mechanical Properties; Wear; SLIDING WEAR BEHAVIOR; AL-ZN ALLOY; MATRIX COMPOSITES; TENSILE BEHAVIOR; FRICTION; COPPER; MICROSTRUCTURE; PERFORMANCE; METAL;

D O I：

10.1016/j.msea.2010.11.006

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

In this experiment, copper-base composites reinforced with 30 nm and 5 mu m SiC particles are fabricated on the surface of a purecopper sheetvia friction stir processing (FSP). Microstructure, mechanical properties and wear resistance of friction stir processed (FSPed) materials are investigated as a function of volume fraction of SiC particles. Results show that, applying FSP, without SiC particles, increases the percent elongation significantly (more than 2.5 times) and decreases copper's strength. Adding micro- and nano-sized SiC particles decreases the tensile strength and percent elongation. Increasing the volume fraction or decreasing the reinforcing particle size enhances the tensile strength and wear resistance and lowers the percent elongation. (c) 2010 Elsevier B.V. All rights reserved.

引用

页码：1740 / 1749

页数：10

共 33 条

[1] Effect of friction stir processing on the tribological performance of high carbon steel [J].