Effects of Notches on Breakdown Pressures and Fracture Evolution in Hydraulic Fracturing

Sustainable ore extraction in cave mining heavily relies on the effective fragmentation or caveability of the orebody. Since cave mining offers substantial benefits, it has gained popularity after preconditioning was introduced to help improve caveability. Therefore, hydraulic fracturing serves as a vital technique for risk management and cave stimulation. The increased rock competency and high stress levels in the rock mass around the orebody significantly influence fracturing and, thus, cavability processes. In order to improve the & ccedil;efficiency of preconditioning by hydraulic fracturing to specific parts of the non-caving or poorly caving formations, the use of notches as artificial flaws offers an influence on the directionality of fracture propagation; this approach also has the potential to decrease the necessary breakdown pressures, thereby lifting limitations on the design and mechanical capabilities of fracturing campaigns and reducing required breakdown pressures, which could improve hydraulic fracturing capabilities. In this study, we studied the effects of notches on hydraulic fracturing performance under varying stress conditions. A number of hydraulic fracturing experiments were conducted using different notch quantities and spacings. Notches were created parallel to the axis of confining stress, and specimens were then subjected to constant axial loads of 40 MPa under varying confining pressures ranging from 5 to 40 MPa. A supplementary 3-D discrete element method using 3DEC was performed, and the results were compared with the hydraulic fracturing experiment. The 3DEC models incorporated Darcy's Law to describe fluid flow through fractures, and the Mohr-Coulomb softening yield criterion was used to simulate failures on predefined surfaces, providing a thorough hydro-mechanical coupled solution. We found that introducing notches can effectively reduce the pressures needed for fracture initiation and growth. Moreover, with appropriate spacing, fracture direction can be controlled. This knowledge, combined with the use of numerical modelling, has advanced our understanding of fracture behaviour and the influence of notches on propagation paths under different stress regimes. These findings could potentially revolutionise the field of hydraulic fracturing, making it more efficient and sustainable. Comprehensive experimental work was undertaken on Adelaide Black Granite to investigate the influence of notches on hydraulic fracturing.Introducing notches caused lower breakdown pressures with localised prescribed directional fracture changes.Use of Mode-I fracture toughness calculated from the AUSBIT test led to a more precise breakdown model prediction.The number and spacing of notches seem to have limited impact on injection pressures but showed influence over fracture pathways and growth.Successful validation of experimental work through numerical modelling allows for the simulation of hydraulic fracture pathway growths and coalescence under various notch densities and stress regimes.