Internal oxidation behavior and its effect on the surface crack formation in a Fe-Mn-Al-C high Mn steel

The correlation between internal oxidation and surface crack was investigated in high Mn steel. Time- and temperature-dependent internal oxidation behaviors are examined in the temperature ranges of 1000- 1250 degrees C, revealing faster and deeper oxidation along grain boundaries than in grain. Oxides at the internal oxidation layer are confirmed to be MnO and MnAl2O4. The grain boundary penetration depths of the internal oxide increase from 13 to 34 mu m as the temperature increases. The tensile crack on the surface of the specimen was evaluated after 5 % straining with 10(-3)/s strain. Temperature-dependent crack formation probability (L-AC/L-T) increases also from 0.4 to 1.6 % as the temperature increases. The evolution of the internal oxidation layer during the hot compression test was investigated to clarify its role in surface crack formation. The transition of the internal oxide layer to the external oxide layer was observed. Exfoliation of the external oxidation layer was also confirmed by further compression. Driving force calculation on the internal and external oxides reveals that the abundant oxygen supply originating from the cracking of oxide and thickness reduction of the internal oxide layer transforms the internal oxide layer to scale during the compression. High-resolution analysis of the grain boundary crack reveals the cracking of grain boundary MnAl2O4. The comparison between the grain boundary oxides' penetration depth and the crack formation behavior clarifies the grain boundary internal oxide's crucial role in the surface crack formation in a high Mn steel. This study provides vital insights into the surface crack formation mechanism in a Fe-Mn-Al-C-based high Mn steel during hot-rolling processes, highlighting the significance of grain boundary internal oxidation in production.