Synergistic effect of temperature, concentration and solution flow on corrosion and passive film of austenitic SS 304L and 316L in concentrated sulfuric acid

被引：4

作者：

Javidi, Mehdi ^{[1
]}

Abadeh, Hooman Karimi ^{[1
,2
]}

Yazdanpanah, Hamid Reza ^{[1
]}

Namazi, Fatemeh ^{[1
]}

Shiri, Narjes Shirvani ^{[1
]}

机构：

[1] Shiraz Univ, Dept Mat Sci & Engn, Sch Engn, Shiraz 7134851154, Iran

[2] Chalmers Univ Technol, Dept Chem & Chem Engn, Kemigarden 4, S-41296 Gothenburg, Sweden

来源：

CORROSION SCIENCE | 2024年 / 237卷

关键词：

316L; 304L; Corrosion; Sulfuric acid; EIS; Mott-Schottky; FERRITIC STAINLESS-STEEL; FE-CR ALLOYS; ELECTROCHEMICAL-BEHAVIOR; ELECTRONIC-PROPERTIES; CHROMIUM; 304-STAINLESS-STEEL; MECHANISM; ELEMENT; IRON; EIS;

D O I：

10.1016/j.corsci.2024.112306

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The synergistic effect of temperature, sulfuric acid concentration and solution flow on the corrosion behavior and passive film properties of austenitic SS 304L and 316L have been investigated in concentrated sulfuric acid. Design of experiment was used and electrochemical techniques were employed. It was found that investigated parameters synergistically affect the corrosion behavior and passive film properties. Surface films formed at high concentrations are less defective and increasing temperature and solution flow introduced more defects; however, the passive film repairs itself. Increasing the temperature and solution flow resulted in higher passive film coverage and cracking of the passive film, respectively.

引用

页数：15

共 56 条

[1] Effects of solution temperature on electronic properties of passive film formed on Fe in pH 8.5 borate buffer solution
Ahn, SJ
Kwon, HS
[J]. ELECTROCHIMICA ACTA, 2004, 49 (20) : 3347 - 3353
[2] Modelling of the passivation mechanism of Fe-Cr binary alloys from ac impedance and frequency resolved rrde .2. Behaviour of Fe-Cr alloys in 0.5 M H2SO4 with an addition of chloride
Annergren, I
Keddam, M
Takenouti, H
Thierry, D
[J]. ELECTROCHIMICA ACTA, 1997, 42 (10) : 1595 - 1611
[3] [Anonymous], 2023, Standard Specificationfor CrosslinkedPolyethylene (PEX) Tubing
[4] [Anonymous], 2021, Standard Test Methods for Tension Testing of Metallic Materials, DOI [10.1520/E0008_E0008M-21, DOI 10.1520/E0008_E0008M-21]
[5] The role of common outer diffusion layer in the metal electrodeposition into template nanopores
Bograchev, Daniil A.
Davydov, Alexey D.
[J]. ELECTROCHIMICA ACTA, 2021, 367
[6] EIS evaluation of steady-state characteristic of 316L stainless steel passive film grown in acidic solution
Boissy, C.
Alemany-Dumont, C.
Normand, B.
[J]. ELECTROCHEMISTRY COMMUNICATIONS, 2013, 26 : 10 - 12
[7] Influence of molybdenum on the conduction mechanism in passive films on iron-chromium alloys in sulphuric acid solution
Bojinov, M
Fabricius, G
Laitinen, T
Mäkelä, K
Saario, T
Sundholm, G
[J]. ELECTROCHIMICA ACTA, 2001, 46 (09) : 1339 - 1358
[8] Enhancement of corrosion resistance of a biomedical grade 316LVM stainless steel by potentiodynamic cyclic polarization
Bou-Saleh, Ziad
Shahryari, Abdullah
Omanovic, Sasha
[J]. THIN SOLID FILMS, 2007, 515 (11) : 4727 - 4737
[9] Box GEP, 1960, Technometrics, V2, P455, DOI [10.1080/00401706.1960.10489912, DOI 10.1080/00401706.1960.10489912]
[10] The remarkable passivity of austenitic stainless steel in sulphuric acid solution and the effect of repetitive temperature cycling
Burstein, G. T.
Daymond, B. T.
[J]. CORROSION SCIENCE, 2009, 51 (10) : 2249 - 2252

← 1 2 3 4 5 6 →