Controlling the nanoparticle size and shape of a Pt/TiO2 catalyst for enhanced hydrogenation of furfural to furfuryl alcohol

被引:0
作者
Alsharif, Heba [1 ,2 ]
Conway, Matthew B. [1 ]
Morgan, David J. [1 ]
Davies, Thomas E. [1 ]
Taylor, Stuart H. [1 ]
Sankar, Meenakshisundaram [1 ]
机构
[1] Cardiff Univ, Cardiff Catalysis Inst, Sch Chem, Translat Res Hub, Cardiff CF24 4HQ, Wales
[2] Taibah Univ, Fac Sci, Chem Dept, Al Madinah Al Munawarah 41477, Saudi Arabia
来源
RSC SUSTAINABILITY | 2024年 / 2卷 / 12期
基金
英国工程与自然科学研究理事会;
关键词
SELECTIVE HYDROGENATION; 2-METHYLFURAN;
D O I
10.1039/d4su00388h
中图分类号
O6 [化学];
学科分类号
0703 ;
摘要
We report the selective liquid phase hydrogenation of furfural to 2-furfuryl alcohol using a Pt/TiO2 catalyst prepared by the wet-impregnation method under mild reaction conditions (30 degrees C and 3 bar H-2 pressure). The effect of heat treatment protocols on the catalyst structures and the resultant catalytic properties of 4.2%Pt/TiO2 and 0.6%Pt/TiO2 was investigated. For both Pt loadings, the calcined + reduced catalyst exhibited higher activity compared to the reduced only catalyst, with the difference in activity being more pronounced for 4.2%Pt/TiO2 than for 0.6%Pt/TiO2. For the 4.2%Pt/TiO2 catalyst, the reduced-only sample achieved 25% conversion with 90% selectivity for 2-furfuryl alcohol after 6 hours, while the calcined + reduced sample reached 99% conversion with 59% selectivity under identical reaction conditions. For the 0.6%Pt/TiO2 catalyst, the reduced-only sample showed 70% conversion with 96% selectivity for 2-furfuryl alcohol, whereas the calcined + reduced sample achieved 97% conversion and 95% selectivity after a 2-h reaction. Characterisation of the samples using X-ray photoelectron spectroscopy, CO chemisorption and scanning transmission electron microscopy revealed that direct high temperature reduction resulted in a mixture of large Pt particles (>5 nm) with irregular shapes, small Pt nanoparticles (ca. 2 nm) and some sub-nm clusters. In contrast, calcination + reduction produced uniformly distributed Pt nanoparticles (ca. 2 nm) for both Pt loadings. Despite the presence of strong metal support interaction (SMSI) in Pt/TiO2 catalysts, no spectroscopic evidence for such a strong interaction was found in this study. Therefore, the observed difference in catalytic activity is attributed to the variations in the shapes and sizes of the Pt nanoparticles. During the synthesis of Pt/TiO2 catalysts, the calcination + reduction activation procedure is more beneficial for enhancing both activity and selectivity compared to a reduction only procedure.
引用
收藏
页码:3888 / 3896
页数:9
相关论文
共 50 条
  • [1] Flame spray-synthesized Pt-Co/TiO2 catalysts for the selective hydrogenation of furfural to furfuryl alcohol
    Tolek, Weerachon
    Khruechao, Kitima
    Pongthawornsakun, Boontida
    Mekasuwandumrong, Okorn
    Aires, Francisco Jose Cadete Santos
    Weerachawanasak, Patcharaporn
    Panpranot, Joongjai
    CATALYSIS COMMUNICATIONS, 2021, 149
  • [2] Synergetic catalysis of Pt/WN-TiO2 nanocomposites for selective hydrogenation of furfural to valuable furfuryl alcohol
    Tian, Xiqiang
    Dong, Yanping
    Zahid, Muhammad
    MOLECULAR CATALYSIS, 2023, 545
  • [3] Hydrogenation of Furfural to Furfuryl Alcohol over Nickel Supported Bentonite Catalyst
    Kamble, Paresh A.
    Kantam, Mannepalli Lakshmi
    Rathod, Virendra K.
    CHEMISTRYSELECT, 2021, 6 (25): : 6601 - 6606
  • [4] Selective hydrogenation of furfural to furfuryl alcohol over Pd/TiH2 catalyst
    Wang, Zhuangqing
    Wang, Xinchao
    Zhang, Chao
    Arai, Masahiko
    Zhou, Leilei
    Zhao, Fengyu
    MOLECULAR CATALYSIS, 2021, 508
  • [5] Performance of Cu/TiO2-SiO2 catalysts in hydrogenation of furfural to furfuryl alcohol
    Li, Feng
    Cao, Bo
    Ma, Rui
    Liang, Jinrong
    Song, Hualin
    Song, Hua
    CANADIAN JOURNAL OF CHEMICAL ENGINEERING, 2016, 94 (07) : 1368 - 1374
  • [6] An Investigation of the Effect of the Addition of Tin to 5%Pd/TiO2 for the Hydrogenation of Furfuryl Alcohol
    King, Gavin M.
    Iqbal, Sarwat
    Miedziak, Peter J.
    Brett, Gemma L.
    Kondrat, Simon A.
    Yeo, Benjamin R.
    Liu, Xi
    Edwards, Jennifer K.
    Morgan, David J.
    Knight, David K.
    Hutchings, Graham J.
    CHEMCATCHEM, 2015, 7 (14) : 2122 - 2129
  • [7] Efficient hydrogenation of furfural to furfuryl alcohol by magnetically recoverable RuCo bimetallic catalyst
    Wang, Yongxing
    Gao, Tianyu
    Lu, Yaowei
    Wang, Yinghao
    Cao, Qiue
    Fang, Wenhao
    GREEN ENERGY & ENVIRONMENT, 2022, 7 (02) : 275 - 287
  • [8] Pd-Ru/TiO2 catalyst - an active and selective catalyst for furfural hydrogenation
    Aldosari, Obaid F.
    Iqbal, Sarwat
    Miedziak, Peter J.
    Brett, Gemma L.
    Jones, Daniel R.
    Liu, Xi
    Edwards, Jennifer K.
    Morgan, David J.
    Knight, David K.
    Hutchings, Graham J.
    CATALYSIS SCIENCE & TECHNOLOGY, 2016, 6 (01) : 234 - 242
  • [9] Hydrogenation and Hydrolysis of Furfural to Furfuryl Alcohol, Cyclopentanone, and Cyclopentanol with a Heterogeneous Copper Catalyst in Water
    Zhou, Xuyang
    Feng, Zhipeng
    Guo, Wanwan
    Liu, Junmei
    Li, Ruyue
    Chen, Rizhi
    Huang, Jun
    INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 2019, 58 (10) : 3988 - 3993
  • [10] Hydrogenation of furfural to furfuryl alcohol over efficient sol-gel nickel-copper/zirconia catalyst
    Sebin, Merve Ece
    Akmaz, Solmaz
    Koc, Serkan Naci
    JOURNAL OF CHEMICAL SCIENCES, 2020, 132 (01)