Experimental and prediction model of axial compressive responses of corroded RC cylinders strengthened with CFRP

被引:5
作者
Li, Lei [1 ,2 ]
Chen, Jing [1 ]
Wang, Wentao [1 ]
Dai, Kuangyu [3 ]
Hu, Weibing [1 ]
机构
[1] Xian Univ Architecture & Technol, Coll Civil Engn, Xian, Peoples R China
[2] State Key Lab Green Bldg Western China, Xian 710055, Peoples R China
[3] Zhengzhou Univ, Sch Civil Engn, Zhengzhou 450001, Peoples R China
基金
中国国家自然科学基金;
关键词
Corroded; RC cylinders; Axial compressive; CFRP; STRESS-STRAIN MODEL; FRP-CONFINED CONCRETE; STRUCTURAL PERFORMANCE; CORROSION; BEHAVIOR; COLUMNS; REPAIR; BEAMS;
D O I
10.1016/j.engstruct.2024.118649
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
Currently, the capacity of corroded RC cylinders has been proven to significantly improve after being strengthened with carbon fiber reinforced polymer (CFRP). However, existing experimental data remains insufficient, resulting in few models available for predicting the post-strengthening capacity of corroded cylinder. The current understanding of the mechanism by which corrosion affects the mechanical properties of CFRP strengthened cylinders is also not yet clear. Against this background, this study conducted monotonic axial compression tests on CFRP-strengthened corroded RC cylinders. The experimental results indicate that while the CFRP layer predominantly controls the specimen's load-bearing capacity, the reduction in CFRP rupture strain due to increased corrosion rates should not be overlooked. When the corrosion rate reaches 35 %, the experimentally measured average rupture strain was only 65 % of the theoretical value, marking a 30 % decrease compared to non-corroded specimens. Subsequently, a predictive model for peak stress and strain of CFRPconfined corroded RC cylinders was proposed, which considers the confinement mechanisms of stirrups and CFRP as well as the degradation of CFRP rupture strain. Leveraging the existing test data, a dataset comprising 80 CFRP-strengthened corroded RC cylinder specimens was established to calibrate the key parameters in the proposed prediction model. Comparative analysis with existing models indicates that the peak stress and strain prediction model proposed in this study demonstrated the highest forecasting accuracy (the average errors for peak stress and strain were 14 % and 32.6 %, respectively), while existing other predictive models based on limited datasets suffer from a lack of universality. The experimental data and research conclusions of this article can provide reference for engineering practice and the establishment of models in subsequent research.
引用
收藏
页数:15
相关论文
共 50 条
  • [41] Strengthening of corroded steel CHS columns under axial compressive loads using CFRP
    Youse, Omid
    Narmashiri, Kambiz
    Hedayat, Amir Ahmad
    Karbakhsh, Ali
    JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH, 2021, 178
  • [42] Failure mode-based calculation method for bending bearing capacities of corroded RC beams strengthened with CFRP sheets
    Yu, Xi -Yuan
    Jiang, Chao
    Zhang, Wei-Ping
    ENGINEERING STRUCTURES, 2022, 271
  • [43] Experimental Study of Rectangular RC Columns Strengthened with CFRP Composites under Eccentric Loading
    Sadeghian, Pedram
    Rahai, Ali R.
    Ehsani, Mohammad R.
    JOURNAL OF COMPOSITES FOR CONSTRUCTION, 2010, 14 (04) : 443 - 450
  • [44] Experimental Study on Flexural Performance of Corroded RC Beams Strengthened with AFRP Sheets
    Deng, Zong-Cai
    Li, Jian-Hui
    Lin, He-Fei
    ULTRA-HIGH-PUMPABILITY AND HIGH PERFORMANCE CONCRETE TECHNOLOGY, 2009, 405-406 : 343 - 349
  • [45] Experimental and numerical studies on the axial compressive performance of localized corroded circular steel tubes
    Liu, Wenhao
    Zhang, Yuxuan
    Zeng, Bin
    Zhou, Zhen
    ENGINEERING STRUCTURES, 2025, 324
  • [46] Experimental study on the flexural behavior of RC beams strengthened with CFRP laminates
    Yi, WJ
    Huang, HM
    FRP COMPOSITES IN CIVIL ENGINEERING, VOLS I AND II, PROCEEDINGS, 2001, : 399 - 405
  • [47] Experimental study of moment redistribution in RC frames strengthened with CFRP sheets
    Farahbod, Farhang
    Mostofinejad, Davood
    COMPOSITE STRUCTURES, 2011, 93 (03) : 1168 - 1177
  • [48] Experimental study on seismic behavior of RC frames strengthened with CFRP sheets
    Zhu, Jun-Tao
    Wang, Xin-Ling
    Xu, Zhao-Dong
    Weng, Chen-Hui
    COMPOSITE STRUCTURES, 2011, 93 (06) : 1595 - 1603
  • [49] Axial Compressive Performance of CFRP Confined Self-stressing High-strength Concrete Cylinders
    Cao, Qi
    Li, Xiaojun
    Gao, Rongxiong
    KSCE JOURNAL OF CIVIL ENGINEERING, 2019, 23 (09) : 4000 - 4009
  • [50] Slender RC columns strengthened with combined CFRP and steel jacket under axial load
    Lu, Yi-yan
    Li, Na
    Li, Shan
    Ou, Tian-yan
    STEEL AND COMPOSITE STRUCTURES, 2015, 19 (05) : 1077 - 1094