Optimization of friction stir welding process parameter in the joining of AA7075-T6/AA5083-O dissimilar aluminum alloy using response surface methodology

被引:4
作者
Mothilal, Meghavath [1 ]
Kumar, Atul [1 ]
机构
[1] Vellore Inst Technol, Sch Mech Engn, Vellore 632014, Tamil Nadu, India
关键词
Friction stir welding; Response surface methodology; Weld efficiency; Electron backscattered diffraction; MECHANICAL-PROPERTIES; BEHAVIOR; JOINTS; LASER;
D O I
10.1016/j.ijpvp.2024.105282
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
This present study is aimed to produce high-strength dissimilar joints of AA5083-O and AA7075-T6 alloys through optimization in the friction stir welding (FSW) process parameters. In this work, we have employed the response surface methodology (RSM) iteratively to generate 20 different welding process parameter combinations. These parameters are used to manufacture dissimilar weld joints, and the impact of these process parameters on the mechanical properties of the weld joints is evaluated by performing a series of mechanical tests such as tensile and microhardness. The microstructural evolution of the welded joints is studied using optical and SEM techniques. EBSD analysis is performed to understand the grain size, orientation, and changes in microstructure. The weld nugget zone reveals the presence of finer grains measured as 0.3 mu m-0.7 mu m. The specimen manufactured using FSW optimized process parameters of rotational speed 1100 rpm, welding speed 50 mm/ min, and tool tilt angle 2 degrees shows the ultimate tensile strength of 417 MPa, weld nugget hardness of 189 HV0.1, and weld efficiency 80.65%. The tensile fractured surface of specimens is also inspected using SEM to determine the mode of failure reached in the welded joints. (c) 2001 Elsevier Science. All rights reserved.
引用
收藏
页数:15
相关论文
共 42 条
  • [1] Experimental investigation on laser transmission welding of PMMA to ABS via response surface modeling
    Acherjee, Bappa
    Kuar, Arunanshu S.
    Mitra, Souren
    Misra, Dipten
    Acharyya, Sanjib
    [J]. OPTICS AND LASER TECHNOLOGY, 2012, 44 (05) : 1372 - 1383
  • [2] Through-thickness crystallographic texture of stationary shoulder friction stir welded aluminium
    Ahmed, M. M. Z.
    Wynne, B. P.
    Rainforth, W. M.
    Threadgill, P. L.
    [J]. SCRIPTA MATERIALIA, 2011, 64 (01) : 45 - 48
  • [3] Friction Stir Welding of Aluminum in the Aerospace Industry: The Current Progress and State-of-the-Art Review
    Ahmed, Mohamed M. Z.
    Seleman, Mohamed M. El-Sayed
    Fydrych, Dariusz
    Cam, Gurel
    [J]. MATERIALS, 2023, 16 (08)
  • [4] Grain Structure, Crystallographic Texture, and Hardening Behavior of Dissimilar Friction Stir Welded AA5083-O and AA5754-H14
    Ahmed, Mohamed Mohamed Zaky
    Ataya, Sabbah
    Seleman, Mohamed Mohamed El-Sayed
    Allam, Tarek
    Alsaleh, Naser Abdulrahman
    Ahmed, Essam
    [J]. METALS, 2021, 11 (02) : 1 - 17
  • [5] Friction stir welded butt joints of AA2024 T3 and AA7075 T6 aluminum alloys
    Avinash, P.
    Manikandan, M.
    Arivazhagan, N.
    Ramkumar, Devendranath K.
    Narayanan, S.
    [J]. INTERNATIONAL CONFERENCE ON MATERIALS FOR ADVANCED TECHNOLOGIES (ICMAT2013), SYMPOSIUM W - ADVANCED STRUCTURAL AND FUNCTIONAL MATERIALS FOR PROTECTION, 2014, 75 : 98 - 102
  • [6] Material flow and mechanical behaviour of dissimilar AA2024-T3 and AA7075-T6 aluminium alloys friction stir welds
    da Silva, A. A. M.
    Arruti, E.
    Janeiro, G.
    Aldanondo, E.
    Alvarez, P.
    Echeverria, A.
    [J]. MATERIALS & DESIGN, 2011, 32 (04) : 2021 - 2027
  • [7] A comparative investigation of butt friction stir welding of aluminium alloys, AA 1100 and AA 7075, with AISI 304 stainless steel
    Datta, Abhijit
    Shrivastava, Ankit
    Mandal, Nilrudra
    Roy, Himadri
    Chakraborty, Shitanshu Shekhar
    [J]. WELDING IN THE WORLD, 2023, 67 (06) : 1449 - 1465
  • [8] Dhabale Rahul B., 2023, Key Engineering Materials, P3, DOI 10.4028/p-ltn695
  • [9] Friction stir welding of industrial grade AISI 316L and P91 steel pipes: A comparative investigation based on mechanical and metallurgical properties
    Gain, Suresh
    Das, Suman Kalyan
    Acharyya, Sanjib Kumar
    Sanyal, Dipankar
    [J]. INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, 2023, 201
  • [10] Influence of cryocooling on friction stir processing of Al-5083 alloy
    Godasu, Ashwin Kumar
    Kumar, Atul
    Mula, Suhrit
    [J]. MATERIALS AND MANUFACTURING PROCESSES, 2020, 35 (02) : 202 - 213