High-Temperature Steam Oxidation Behavior of VDM Alloy 699 XA Produced by Laser Powder Bed Fusion

被引：0
|
作者：
Dudziak, T. [1 ]
Chandran, P. [1 ]
Nowak, B. [4 ]
Verma, B. [3 ]
Roth, J. -p. [2 ]
Rzad, E. [1 ]
Chat-Wilk, K. [1 ]
Polkowska, A. [1 ]
Samy, V. Narayana [3 ]
Reich, S. [3 ]
Jahns, K. [2 ]
Krupp, U. [2 ]
机构：
[1] Krakow Inst Technol KIT, Lukasiewicz Res Network, Ctr Mat & Mfg Res, 73 Zakopianska St, PL-30418 Krakow, Poland
[2] Osnabruck Univ Appl Sci, Fac Engn & Comp Sci, Albrechtstr 30, D-49076 Osnabruck, Germany
[3] Rhein Westfal TH Aachen, Lehrstuhl Digital Addit Prod DAP, Campus Blvd 73, D-52074 Aachen, Germany
[4] VDM Met Int GmbH, Kleffstr 23, D-58762 Altena, Germany
来源：
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE | 2024年 / 33卷 / 23期
基金：
欧盟地平线“2020”;
关键词：
alloy; nickel; phase composition; SEM; steam oxidation; NI-BASED ALLOYS; ADVANCED STEELS; WATER-VAPOR; SUPERALLOYS; CORROSION;
D O I：
10.1007/s11665-024-09882-w
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
VDM alloy (AM) 699 XA (AM-XA) produced by laser powder bed fusion (LPBF) was subjected to steam oxidation at different high temperatures. Initial studies on mass gain of AM-XA at 650 degrees C after 500 hours revealed insignificant changes. Typical to high temperatures, a wide range of oxides were obtained at 750 and 950 degrees C associated with mass gain. To fully understand AM-XA material behavior at high temperatures, hot-rolled 699 XA (HR-XA) was also fabricated and tested under similar conditions. At 750 degrees C, HR-XA showed a higher mass gain in comparison with AM-XA, whereas at 950 degrees C mass gain of AM-XA overtook HR-XA. This anomalous behavior was related mostly to carbide formation. In-depth anomalous behavior of AM-XA is explained by investigating the microstructure and phase composition of the oxidation products formed.
引用
收藏
页码：13583 / 13595
页数：13
相关论文
共 50 条
  • [1] High-temperature oxidation behavior of Cu-Fe-based immiscible alloy produced by laser powder bed fusion
    Qiu, Yating
    Ren, Pan
    Wen, Chongyu
    Cheng, Dongchu
    Wang, Chenglei
    Lu, Yang
    Zhang, Zhiguo
    Zhou, Shengfeng
    CORROSION SCIENCE, 2024, 226
  • [2] High-temperature oxidation behavior of carbon doped CoCrNi medium entropy alloy fabricated by laser powder bed fusion
    Kim, Soobin
    Park, So-Yeon
    Lee, Kee-Ahn
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2025, 34 : 2430 - 2442
  • [3] High-temperature mechanical properties of alloy 718 produced by laser powder bed fusion with different processing parameters
    Hilaire, Alexandra
    Andrieu, Eric
    Wu, Xinhua
    ADDITIVE MANUFACTURING, 2019, 26 : 147 - 160
  • [4] High-temperature oxidation of advanced FeCrNi alloy in steam environments
    Elbakhshwan, Mohamed S.
    Gill, Simerjeet K.
    Rumaiz, Abdul K.
    Bai, Jianming
    Ghose, Sanjit
    Rebak, Raul B.
    Ecker, Lynne E.
    APPLIED SURFACE SCIENCE, 2017, 426 : 562 - 571
  • [5] Laser Powder Bed Fusion of NiTiHf High-Temperature Shape Memory Alloy: Effect of Process Parameters on the Thermomechanical Behavior
    Nematollahi, Mohammadreza
    Toker, Guher P.
    Safaei, Keyvan
    Hinojos, Alejandro
    Saghaian, S. Ehsan
    Benafan, Othmane
    Mills, Michael J.
    Karaca, Haluk
    Elahinia, Mohammad
    METALS, 2020, 10 (11) : 1 - 21
  • [6] High-temperature oxidation behaviour of a Co-based superalloy fabricated through laser powder bed fusion
    Guo, Chuan
    Li, Yu
    Li, Ying
    Li, Gan
    Lu, Xinya
    Li, Zhuoyu
    Chen, Xuliang
    Li, Xinggang
    Zhou, Lin
    Zhu, Qiang
    Lu, Jian
    CORROSION SCIENCE, 2024, 227
  • [7] High-Temperature Air and Steam Oxidation and Oxide Layer Characteristics of Alloy 617
    Archana, M.
    Rao, Ch Jagadeeswara
    Ningshen, S.
    Philip, John
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2021, 30 (02) : 931 - 943
  • [8] Corrosion behavior of laser powder bed fusion additive manufacturing produced TiNi alloy by micro-arc oxidation
    Zhao, Xin
    Liu, Yicheng
    Jia, Chenfan
    Chang, Hao
    Zhang, Wei
    Bai, Yun
    Li, Shujun
    Zhang, Lai-Chang
    Yuan, Wei
    NPJ MATERIALS DEGRADATION, 2024, 8 (01)
  • [9] High temperature oxidation behavior of laser powder bed fusion printed WC/Inconel 718 composites
    Wang, Rui
    Gu, Dongdong
    Zhang, Hongmei
    Guo, Meng
    JOURNAL OF MATERIALS SCIENCE, 2022, 57 (29) : 14119 - 14134
  • [10] High-temperature oxidation performance of Ni-based GH3536 superalloy fabricated by laser powder bed fusion
    Min, Shiling
    Liu, Hui
    Yang, Mengmeng
    Zhang, Huawei
    Hou, Juan
    Zhang, Kai
    Liang, Jingjing
    Li, Jinguo
    Wang, Hao
    Wang, Jianqiu
    Huang, Aijun
    NPJ MATERIALS DEGRADATION, 2022, 6 (01)
12345