Investigation of the fracture characteristics of mixed-mode I/III crack by using two kinds of sandstone specimens

被引:5
作者
Shui, Xin [1 ]
Zhou, Lei [1 ]
Zhu, Zheming [1 ]
Nie, Fukuan [1 ]
Wang, Haohan [1 ]
Zhang, Hongdan [1 ]
机构
[1] Sichuan Univ, Coll Architecture & Environm, State Key Lab Intelligent Construct & Hlth Operat, Chengdu 610065, Peoples R China
基金
中国国家自然科学基金;
关键词
I/III mixed-mode; Single-edge notch bending; Edge-notched disc bend; Fracture toughness; Failure patterns; TOUGHNESS DETERMINATION; HMA MIXTURES; BEHAVIOR; TESTS; ROCKS;
D O I
10.1016/j.engfracmech.2024.110488
中图分类号
O3 [力学];
学科分类号
08 ; 0801 ;
摘要
This study aims to identify specimens that are more suitable for examining the failure properties of I/III mixed-mode cracks under static loads. We employed single-edge notched bending (SENB) and edge-notched disc bending (ENDB) specimens, and used ABAQUS finite element method software to calculate the stress intensity factors for modes I and III at various crack inclination angles theta . Fracture toughness was tested using three-point bending experiments on two types of sandstone specimens. The evolution of mixed-mode I/III fracture morphology and failure patterns was investigated with a monocular microscope. Additionally, the evolution of the strain field and crack tip opening displacement was analyzed using the digital image correlation method. Our findings indicate that the fracture toughness of the ENDB specimens surpassed that of the SENB specimens. The effective fracture toughness of both SENB and ENDB specimens initially increased with crack inclination angle theta but then decreased. The fracture mode correlated with energy release; the energy release rate of the ENDB specimens exceeded that of the SENB specimens, making the former more brittle. For SENB specimens, crack initiation was primarily intergranular, while ENDB specimens exhibited predominantly transgranular fractures. The crack initiation moments for both specimen types increased with higher crack inclination angles. Furthermore, at the same crack inclination angle, ENDB specimens cracked earlier than SENB specimens.
引用
收藏
页数:19
相关论文
共 50 条
[41]   Experimental investigation of mixed-mode fracture behaviour of woven laminated composite [J].
Nikbakht, Masood ;
Choupani, Naghdali .
JOURNAL OF MATERIALS SCIENCE, 2009, 44 (13) :3428-3437
[42]   Experimental investigation of mixed-mode fracture behaviour of woven laminated composite [J].
Masood Nikbakht ;
Naghdali Choupani .
Journal of Materials Science, 2009, 44 :3428-3437
[43]   Experimental investigation on the mixed-mode fracture of rubber-toughened PMMA using essential work of fracture method [J].
Haddadi, E. ;
Choupani, N. ;
Abbasi, F. .
ENGINEERING FRACTURE MECHANICS, 2016, 162 :112-120
[44]   Mixed-mode I plus III tests on hyperelastic adhesive joints at prescribed mode-mixity [J].
Loh, Lukas ;
Marzi, Stephan .
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 2018, 85 :113-122
[45]   Modelling fracture on polyolefin fibre reinforced concrete specimens subjected to mixed-mode loading [J].
Suarez, F. ;
Galvez, J. C. ;
Enfedaque, A. ;
Alberti, M. G. .
ENGINEERING FRACTURE MECHANICS, 2019, 211 :244-253
[46]   Mixed mode (I/III) fracture studies using a new specimen setup [J].
Shukla, Shiv Sahaya ;
Murthy, K. S. R. K. ;
Sajith, S. .
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2023, 243
[47]   Experimental study on the mixed mode I-III fracture behaviors of sandstone after high temperature treatment [J].
Li W. ;
Su H. ;
Yu L. ;
Liu R. ;
Chen G. .
Caikuang yu Anquan Gongcheng Xuebao/Journal of Mining and Safety Engineering, 2023, 40 (06) :1281-1289
[48]   Effect of heat-treatment on the pure- and mixed-mode fracture properties of a homogeneous sandstone [J].
Roy, Debanjan Guha ;
Singh, T. N. .
GEOMECHANICS FOR ENERGY AND THE ENVIRONMENT, 2023, 33
[49]   An investigation of Mode I and Mode II fracture toughness enhancement using aligned carbon nanotubes forests at the crack interface [J].
Falzon, Brian G. ;
Hawkins, Stephen C. ;
Huynh, Chi P. ;
Radjef, Racim ;
Brown, Callum .
COMPOSITE STRUCTURES, 2013, 106 :65-73
[50]   AI-driven data fusion modeling for enhanced prediction of mixed-mode I/ III fracture toughness [J].
Timtong, Anantaya ;
Ariyarit, Atthaphon ;
Boongsood, Wanwanut ;
Aengchuan, Prasert ;
Wiangkham, Attasit .
RESULTS IN ENGINEERING, 2024, 24