Biaxial Buckling Analysis of Soft-Core Functionally Graded Graphene-Reinforced Sandwich Plates

Graphene platelets (GPLs) exhibit outstanding mechanical and physical properties and therefore are employed as a reinforcement in advanced polymer composite structures. The purpose of this paper is to analyze the biaxial buckling of functionally graded graphene-reinforced sandwich plates with a soft orthotropic core. A new high-order three-layer theory is developed for the accurate modeling and analysis of the sandwich structure. The sandwich plate is divided into three layers including two face sheets and a core and a different third-order kinematic assumption is dedicated to each layer. The transverse flexibility of each layer as well as the displacements continuity at the interfaces are considered. Additionally, the continuity conditions and the conditions of zero transverse stresses in the whole structure are satisfied. The plate is subjected to a biaxial compressive loading and the governing equations are derived using the principle of minimum potential energy. Analytical solutions are presented for simply supported boundary conditions to obtain the critical buckling load. The influences of plate geometry and GPL properties on buckling load are investigated. The results obtained in specific cases are compared with the published results and the validity of the present results is confirmed. It can be drawn that the use of GPL increases the buckling load of graphene-reinforced sandwich plates.