Fabrication and performance of short glass fiber reinforced polyamide composites

This article deals with the impact of short glass fiber (GF) on the performance of 60/40 wt% of polyamide 6/polyamide 12 (PA6/PA12) blend. The short fiber-reinforced composites were fabricated by using melt compounding via twin screw extruder and injection molding. The morphological, water uptake, rheological, thermo-mechanical, and mechanical properties of the composites were discussed. The morphological observations show that the PA6/PA12 blend exhibited compatible morphology and also adhesion between the fiber and matrix was quite strong. The tensile strength/modulus and storage modulus of the blend were substantially improved with GF reinforcement as a result of these morphological findings. While the water uptake of neat PA6 decreased significantly after blending with PA12, the incorporation of GF further reduced the water uptake of the PA6/PA12 blend. The thermomechanical analysis showed the enhancement of the stiffness of the composites and also glass transition temperature increment.