Contribution of geometrical infill pattern on mechanical behaviour of 3D manufactured polylactic acid specimen: Experimental and numerical analysis

Additive manufacturing is regarded as a very efficient fabrication technique since it permits the manufacturing of any three-dimensional product. The present work determines the effect of various infill pattern on the mechanical properties in term of tensile strength, yield strength and hardness of poly-lactic acid (PLA) samples fabricated by fused deposition modeling method. The mechanical behaviour of the 3D-printed PLAs investigated using dog-bone specimens with six distinct infill patterns: line, triangle, tri-hexagon, cubic, octet, and gyroid. The mechanical characteristics were evaluated using the uniaxial tensile test and shore D type hardness tester. The strain and deformation criteria were employed to substantiate the ductile and brittle characteristics. The fractural surface morphology analyzed using the field emission scanning electron microscope. Nonlinear Finite Element Analysis (FEA) was employed to simulate the uniaxial tensile test and establish a Yeoh third order hyperelastic material model for the predictions of the stress-strain response. This model is chosen for its precise ability to predict the nonlinear stress-strain responses for significant deformation and is crucial in applications that involve high degrees of flexibility and elasticity, such as in tire modeling, polymer and elastomer analysis, sports equipment designing, 3D printed components etc. Results revealed that the cubic infill had a maximum tensile strength 32.648 +/- 1.42 MPa and octet infill had a minimum tensile strength 22.373 +/- 0.79 MPa. The majority of experimental data indicated a brittle behaviour for line-infilled, but triangular, trihexagonal, cubic, octet, and gyroid infill patterns demonstrated ductile behaviour. In comparison to other geometrical infills, cubic shown relatively superior mechanical responses. Consequently, the geometrical infill effect plays a significant role in finding the appropriate mechanical property for industrial applications. The developed material model possesses potential utility in non-linear FEA investigations pertaining to 3D printed PLA objects that are predicted to sustain tensile strength.