Assessing the influence of welding-induced mechanics on oxidation and stress corrosion cracking in an Alloy 600-Alloy 152 M weldment under simulated PWR primary water

被引：3

作者：

Xu, Xinhe ^{[1
,2
]}

Pan, Deng ^{[1
,2
]}

Li, Entong ^{[1
,2
]}

Lu, Zhanpeng ^{[1
,2
]}

Cui, Tongming ^{[1
,2
]}

Chen, Junjie ^{[1
,2
]}

Zheng, Hui ^{[3
]}

Li, Kai ^{[3
]}

Lozano-Perez, Sergio ^{[4
]}

Shoji, Tetsuo ^{[5
]}

机构：

[1] Shanghai Univ, Inst Mat, Sch Mat Sci & Engn, Shanghai 200072, Peoples R China

[2] Shanghai Univ, State Key Lab Adv Special Steels, Shanghai 200072, Peoples R China

[3] State Nucl Power Plant Serv Co, 888 Tianlin Rd, Shanghai 200233, Peoples R China

[4] Univ Oxford, Dept Mat, Parks Rd, Oxford OX1 3PH, England

[5] Tohoku Univ, New Ind Creat Hatchery Ctr, Sendai 9808579, Japan

来源：

JOURNAL OF NUCLEAR MATERIALS | 2024年 / 601卷

关键词：

Pressurized water reactor; Alloy; 600; Heat-affected zone; Residual stress; Stress corrosion cracking; Oxidation; INTERGRANULAR OXIDATION; HIGH-TEMPERATURE; STAINLESS-STEEL; INTERNAL OXIDATION; MICROSTRUCTURE; DEFORMATION; DEPENDENCE; CARBIDES; BEHAVIOR; STRAIN;

D O I：

10.1016/j.jnucmat.2024.155349

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The impact of welding-induced mechanics on the oxidation and stress corrosion cracking (SCC) behavior of Alloy 600 in a pressurized water reactor (PWR) primary water was investigated using an Alloy 600-Alloy 152 M weldment. The microstructural analysis found a 0.05 mm-wide composition transition zone from welding. The Alloy 600 heat-affected zone (HAZ) grain size matches the Alloy 600 base (600B). Deformation hardening initially decreases and stabilizes from the fusion boundary (FB) to the 600B Comparing the microstructural characteristics of the specimen from the HAZ at about 0.5 mm from the FB with specimen 600B shows identical composition, but the former exhibits higher Vickers hardness (HV), kernel average misorientation (KAM), dislocation density, and residual stresses. Results from both short- and long-term oxidation tests indicate that the specimen from the HAZ exhibits a greater thickness of the inner oxide film, a higher number of local oxidation sites, and an increased maximum depth of intergranular (IG) oxidation compared to the 600B specimen. Multiple sets of SCC test results demonstrate that the crack growth rate (CGR) in the specimens from the HAZ is higher than that in the base, with the former showing longer IG cracks and a greater proportion of IG cracking.

引用

页数：24

共 67 条

[1]

Andresen P.L., 2014, CORROSION 2014

[2] Stress Corrosion Cracking of Current Structural Materials in Commercial Nuclear Power Plants [J].

Andresen, Peter L. .

CORROSION, 2013, 69 (10)

[3]

Andresen Peter L., 2019, P 18 INT C ENV DEGR, P27

[4] LIFE PREDICTION BY MECHANISTIC MODELING AND SYSTEM MONITORING OF ENVIRONMENTAL CRACKING OF IRON AND NICKEL-ALLOYS IN AQUEOUS SYSTEMS [J].

ANDRESEN, PL ;

FORD, FP .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1988, 103 (01) :167-184

[5]

[Anonymous], 2010, ASTM E399-09e2 Standard Test Method for Linear-elastic Plane-strain Fracture Toughness of Klc of Metallic Materials

[6] Dependence of stress corrosion cracking for cold-worked stainless steel on temperature and potential, and role of diffusion of vacancies at crack tips [J].

Arioka, K. ;

Yamada, T. ;

Terachi, T. ;

Miyamoto, T. .

CORROSION, 2008, 64 (09) :691-706

[7]

Asada S., 2006, ASME PRESSURE VESSEL, P35

[8]

Bamford W., 2007, Service experience with alloy 182 butt welds, and the weld overlay mitigation process

[9]

Bamford W., 2006, Vessels Pip. Confer., V47578, P427

[10] The effect of residual stress on the Preferential Intergranular Oxidation of Alloy 600 [J].

Bertali, G. ;

Scenini, F. ;

Burke, M. G. .

CORROSION SCIENCE, 2016, 111 :494-507

← 1 2 3 4 5 6 7 →