Thermal shock behavior of novel (Yb0.1Gd0.9)2Zr2O7 thermal barrier coatings with a Cr modified (Ni, Pt)Al bond coat

The durability of thermal barrier coatings (TBCs) is significantly influenced both by the ceramic top coat and the bond coat. In this study, novel YbGdZrO ceramic coats were deposited on the surfaces of three types of Crmodified (Ni, Pt)Al bond coats via electron beam physical vapor deposition (EB-PVD) technique. These Crmodified (Ni, Pt)Al bond coats were fabricated by magnetic sputtering Cr onto the (Ni, Pt)Al bond coats with varying sputtering times of 30, 60, and 90 min. The results indicates that the thickness of the Cr-modified layer increases with the extension of sputtering time. A short deposition time of 30 min is adequate for achieving an appropriate Cr content in the (Ni, Pt)Al bond coats, which ensures selective oxidation of Al element within the bond coat and further enhances the metallurgical interfacial bonding strength with the ceramic coat by adapting to the concentration gradient diffusion. However, as the sputtering time is extended to 60 and 90 min, alpha-Cr begins to form in the Cr-modified (Ni, Pt)Al bond coats, which negatively affects the oxidation resistance of the bond coat. Consequently, the thermal shock life of the TBCs samples is significantly reduced with increasing sputtering time. The longest thermal shock lifetime is obtained on the bond coat with Cr plating time of 30 min owing to a differing thermally grown oxide formation and failure mechanism.