Microstructure and flame-retardant properties of the TF550 titanium alloy by ultrasonic vibration assisted laser solid forming

More and more attention has been paid to the application of flame retardancy and surface strengthening of titanium alloys in the aerospace field. In this paper, ultrasonic vibration assisted the laser solid formed (LSFed) TF550 flame-retardant titanium alloy was studied, and the influence of ultrasonic vibration on the microstructure and flame-retardant properties of the LSFed TF550 alloy was analyzed. The results showed that the LSFed TF550 alloy after ultrasonic vibration treatment effectively reduced the generation of pores. When the ultrasonic amplitude was 60 mu m, the porosity was the lowest. The porosity of the sample was reduced from 3.84 % to 0.53 %, with the reduction of 86 %. The ultrasonic vibration results in the CET transformation of LSFed TF550 alloy specimen, and the average grain length-width ratio decreases from 5.3 to 1.2, and the microstructure of the specimen changes from the average width of 214 mu m to the average grain size of 144 +/- 12 mu m. Especially when the ultrasonic amplitude is 90 mu m, the equiaxial grain size and the grain length-width ratio are the lowest. The effect of ultrasonic vibration at different positions was different. The higher the deposition height, the more columnar crystals in the microstructure and the less equiaxed crystals. When the deposition height was 43 mm, equiaxed crystals and columnar crystals began to coexist. Due to the grain refinement effect of ultrasonic vibration, the number of grain boundaries was increased, and the flame-retardant properties of the LSFed TF550 alloy was improved.