Production of platelet-rich plasma (PRP)-enriched scaffolds for bone tissue regeneration with 3D printing technology

Bone disorders signify diverse abnormalities in the structure, development, and functions of bone tissue in the human body, with a significant correlation to ageing, insufficient physical activity, and escalating obesity. Recent advancements in bone tissue engineering aim to enhance bone tissue formation through the use of biomaterials, growth factors, and cells. The present study focuses on the fabrication and characterisation of scaffolds with a composition of gelatin (GEL) / sodium alginate (SA) / hydroxyapatite (HA) / platelet-rich plasma (PRP) using the 3D printing process. The inclusion of PRP, derived from blood, is of particular interest due to its potential to enhance bone regeneration through various growth factors. Scanning electron microscope (SEM) analysis revealed average pore sizes ranging from 481.50 +/- 7.65 to 623.96 +/- 11.54 mu m. SEM images also showed that scaffold surfaces became smooth as the concentration of PRP increased. The mechanical test results demonstrated that as the PRP increased, the compressive strength decreased. When the swelling and degradation behaviours of scaffolds were examined, it was observed that GEL/SA/HA/3PRP scaffolds exhibited approximately 200 % swelling capability until the 4th day. GEL/SA/HA scaffolds showed a degradation behaviour about 70 % higher compared to other groups. A controlled release profile of PRP was maintained up to the 144th, 216th, and 240th hours from the scaffolds. According to the highest correlation coefficients (R2) in the release kinetics of scaffolds, GEL/SA/HA/0.5PRP and GEL/SA/HA/1PRP scaffolds were explained by the first-order model. In contrast, the GEL/SA/HA/3PRP scaffold was described using the Korsmeyer-Peppas model. The MTT analysis conducted with osteoblast cells showed that scaffolds did not demonstrate any toxic effects and facilitated cell adhesion by inducing the formation of extensions. These findings underscore the potential of PRP-incorporated GEL/SA/HA composites as a promising approach for bone tissue engineering, offering significant advancements in the treatment of bone disorders. This could lead to more effective treatments for bone disorders and injuries, reducing the need for more invasive procedures and improving patient recovery times.