A Novel Hybrid Excitation Magnetic Lead Screw and Its Transient Sub-Domain Analytical Model for Wave Energy Conversion

被引:43
作者
Zhu, Lixun [1 ]
Ma, Chao [1 ]
Li, Wei [2 ]
Huang, Min [1 ]
Wu, Weimin [1 ]
Koh, Chang-Seop [3 ]
Blaabjerg, Frede [4 ]
机构
[1] Shanghai Maritime Univ, Dept Elect Engn, Shanghai 201306, Peoples R China
[2] Tongji Univ, Dept Elect Engn, Shanghai 201804, Peoples R China
[3] Chungbuk Natl Univ, Dept Elect Engn, Cheongju 21366, South Korea
[4] Aalborg Univ, Dept Energy Engn, Aalborg, Denmark
基金
中国国家自然科学基金;
关键词
Rotors; Fasteners; Windings; Lead; Permanent magnets; Wave energy conversion; Analytical models; Subdomain analytical model; magnetic lead screw; wave energy conversion; FIELD DISTRIBUTION; DC MOTORS; MACHINES; DESIGN;
D O I
10.1109/TEC.2024.3354512
中图分类号
TE [石油、天然气工业]; TK [能源与动力工程];
学科分类号
0807 ; 0820 ;
摘要
A magnetic lead screw (MLS), that not only has enough maximum thrust force but also has good controllable performance, is a perfect linear actuator that can convert low-speed linear motion into high-speed rotary motion and apply for wave energy conversion system. In this paper, an improved transient sub-domain analytical model (SDAM) is proposed to analyze the performance of a novel proposed hybrid excitation magnetic lead screw (HEMLS) for the WEC system. The proposed HEMLS not only can have enough maximum thrust through the PM is arranged on both sides of the rotor and mover, but also can be controllable through two-phase windings that carry opposite DC and placed in slots on the mover. The proposed SDAM gives the analytical expressions of trust and torque. The hybrid exciting source and slot effect can be considered in the proposed SDAM. The proposed SDAM is validated by the finite element analysis method under both load and no-load conditions. Finally, a laboratory prototype and the corresponding test platform are developed to verify the effectiveness of the proposed HEMLS and its SDAM.
引用
收藏
页码:1726 / 1737
页数:12
相关论文
共 25 条
[1]  
Agamloh A. Wallace, 2008, U.S.Patent, Patent No. [2008/0309088A1, 20080309088]
[2]   A review of wave energy converter technology [J].
Drew, B. ;
Plummer, A. R. ;
Sahinkaya, M. N. .
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART A-JOURNAL OF POWER AND ENERGY, 2009, 223 (A8) :887-902
[3]   Performance Evaluation of Magnetic Lead Screws Equipped With Skewed Arc Magnets Instead of Helical Ones [J].
Gao, Fang ;
Wang, Qian ;
Hu, Yusheng ;
Chen, Bin ;
Zhao, Bo ;
Zou, Jibin .
IEEE TRANSACTIONS ON MAGNETICS, 2018, 54 (11)
[4]   A New Hybrid Method for Magnetic Field Calculation in IPMSM Accounting for Any Rotor Configuration [J].
Guo, Baocheng ;
Huang, Yunkai ;
Peng, Fei ;
Dong, Jianning .
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 2019, 66 (07) :5015-5024
[5]   General Formulation of the Electromagnetic Field Distribution in Machines and Devices Using Fourier Analysis [J].
Gysen, B. L. J. ;
Meessen, K. J. ;
Paulides, J. J. H. ;
Lomonova, E. A. .
IEEE TRANSACTIONS ON MAGNETICS, 2010, 46 (01) :39-52
[6]  
Hague B., 1929, ELECTROMAGNETIC PROB
[7]   Analytical Calculation of the Magnetic Field Distribution in Slotless Brushless Machines With U-Shaped Interior Permanent Magnets [J].
Hajdinjak, Melita ;
Miljavec, Damijan .
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 2020, 67 (08) :6721-6731
[8]   Analytical Modeling of Surface PMSM Using a Combined Solution of Maxwell's Equations and Magnetic Equivalent Circuit [J].
Hemeida, Ahmed ;
Sergeant, Peter .
IEEE TRANSACTIONS ON MAGNETICS, 2014, 50 (12)
[9]   Magnetic Design Aspects of the Trans-Rotary Magnetic Gear Using Quasi-Halbach Arrays [J].
Jenney, Kurt ;
Pakdelian, Siavash .
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 2020, 67 (11) :9582-9592
[10]   MAGNETIC-FIELD AND EDDY-CURRENT LOSSES IN LINEAR AND ROTATING PERMANENT-MAGNET MACHINES WITH A LARGE NUMBER OF POLES [J].
LIU, ZJ ;
VOURDAS, A ;
BINNS, KJ .
IEE PROCEEDINGS-A-SCIENCE MEASUREMENT AND TECHNOLOGY, 1991, 138 (06) :289-294