Fabrication of fluorinated superhydrophobic oil-absorption cabins with controllable movement, elasticity, and wear resistance

Superhydrophobic materials that can withstand harsh environments are critical in oil spills. Here, fluorinated superhydrophobic monoliths were prepared in one step based on a high internal phase emulsion (HIPE) templating method. gamma-methacryloyloxypropyltrimethoxysilane (KH570)-modified Fe3O4 nanoparticles were added into the emulsion as co-stabilizers and participated in the composition of micro-nano hierarchical structures. The fluorinated alkyl backbone and rough structure enabled the foam to exhibit excellent superhydrophobicity with a water contact angle (WCA) of 153.5 degrees and a sliding angle (SA) of 5.92 degrees. The unique structure and composition of the foam allowed it to maintain stable superhydrophobicity (153.97 degrees) even after severe sandpaper abrasion tests (Drawn 10 m at 7.1 kPa on P400 grit sandpaper). It also demonstrated exceptional hydrophobicity to strong acids, bases, and UV light. The oil-saturated material can be regenerated through a simple extrusion process, showing outstanding reusability. After ten cycles of oil adsorption, the adsorption capacity remains above 90 % of the initial value. The additional magnetic properties of the material enable it to remove oil in confined or hazardous conditions. More importantly, with the assistance of a vacuum pump, the material permits continuous separation of organic solvents from the water. These excellent properties of the foam make it a potential material for treating wastewater.